T Scale TFB sereis Service Manual - 6. Maintenence
TPF / TFB Series Floor Scale Service Manual
- 9 -
6. MAINTENENCE
WARNING
BEWARE OF PINCH POINTS.
USE PROPER LIFITING TECHNICS WHEN
RAISING THE LIFT DECK PLATFORMS.
ENSURE THAT STRUCTURE WHICH SUPPORT
THE FLOOR SCALE IS CAPABLE OF WITH
STANDING THE WEIGHT IF THE SCALE AND ITS
RATED CAPACITY
Permit only qualified persons to service the instrument.
Before connecting or disconnecting any components, remove the
power.
Failure to observe these precautions bodily harm or damage to or
destruction of the equipment.
6.1. Daily Check
Ensure that all four feet are in contact with the floor.
Ensure that the connecting cable to the display unit and the network
connection cable of the display unit are not damaged.
Ensure that the balance is free from dirt, especially under the edges of the
balance.
6.2. Cleaning
Remove regularly corrosive substances.
Keep IP protection.
Protect weighing cells against splash water
When using optional ramps or foot plates, keep clean the air gap at the
edge of the weighing scale.
Wipe the surfaces with a damp cloth.
Only use common household cleaner.
Do not use water jet or high-pressure cleaner.