Summary of Indoor Wave
Page 1
1 art.Nr: 95162 ta. Service a/s · orupgade 32 b · orup · dk-4640 faxe tlf +45 56 72 57 77 · fax +45 56 72 57 76 · www.Ta-service.Dk.
Page 2
2 warnings. Read the instructions carefully. It contains important warnings and instructions. Do not reach into or under the chair when the seat lift and seat tilt is activated, because there is a risk of entrapment between the mechanical parts. Be aware of others, especially children, is too close ...
Page 3
3 preface. Ta services a/s hope you are satisfied with your new ta indoor wave. Ta indoor wave is designed to facilitate your daily movement indoors and outdoors close to your home. It has been very important to design the chair as small and compact as possible, without reducing the chair's stabilit...
Page 4
4 contents warnings. ............................................................................................................................................. 2 preface ..................................................................................................................................
Page 5
5 technical data wheelchair type: class a: wheelchairs mainly intended for indoor use and are not necessarily doing outdoor hurdles. Dimensions: width excl. Seat: 56 cm length excl. Footplate / foot supports: 69.5 cm length incl. Standard footplate: 88.5 cm diagonal excl. Standard footplate: 90 cm d...
Page 6
6 charger specifications: see user's guide included charger - aura 24v / 5 a. Electronics: penny and giles r-net drive control brakes: motor brake and electric brake. Motor brake acts as brake-lock brakes, and is activated when the control stick is released. From you release the control stick and un...
Page 7
7 operating instructions. Before driving: warning! Ta indoor wave is not intended for users with a weight exceeding 120 kg warning! Ta indoor wave should be turned off when making entry and exit of the chair and when assisted by a helper, so that the chair does not accidentally run if the joystick i...
Page 8
8 after driving. Always leave the chair off and put on lowest speed. Nb! Leaving the chair turned on will draw power from batteries, with reduced remaining driving distance to follow. Control box 1 power button 2 horn 3 display 4 driving profile 5 speed up button. 6 switching between driving and men...
Page 9
9 electric back electrical functions pressing the "mode" button to get into the menu from which electrical functions can be operated with a joystick. You select function by flipping the pages with the joystick, and activate the feature by taking the control stick forward or backward. Joystick activa...
Page 10
10 setting menu in the setting menu it is possible to change the clock, brightness, backlight and color, and odometer. To get into the options menu you must hold both buttons speed up and speed down simultaneously. See arrow a - figure 1 the following points are then displayed in the menu: set time:...
Page 11
11 setting the power functions the wheelchair may depending on model have the following power functions: seat lift seat tilt back right legsupport left legsupport the functions are activated by pressing the "mode" button on the control box, then there's a picture of power features. Find the function...
Page 12
12 setting the armrests. Armrest height in distance to the seat and armrest cushion distance to the back can be adjusted. Armrest cushion position relative to the back is adjusted by loosening four screws (a) under the armrest with a slotted screwdriver. Once the screws are loosened, armrest cushion...
Page 13
13 important when driving. Braking. The chair brakes by releasing the control stick, so it returns to the vertical position. It is possible to adjust how fast the chair is slowing down and thus reduce any late run on the chair. This adjustment is carried out by ta service a/s. At a short late run, b...
Page 14
14 driving on slopes. Ta indoor wave can clear terrain rises up to 12°. Driving on sloping surfaces should be carried out forward and at a slow pace. Warning! Driving on slopes should be avoided because a slope to the site will give a risk that the chair can tip over. When driving on slopes, seat sh...
Page 15
15 transportation by car. Ta indoor wave is crash tested with 4-point car tiedown (accessories) and dahl docking system (accessories), so it can be used as a seat in the car, bus or similar. The user can use the ta indoor wave during transport by car, bus or similar, if the ta indoor wave is equippe...
Page 16
16 charging. Ta indoor wave is equipped with a battery level indicator at the top of the control box - the long series of leds. As the chair is used the battery level falls and the leds turn off. See the following explanation: battery indicator: all 10 bar lights (red, yellow and green): the chair i...
Page 17
17 fuses. Under the back shield in the left side is an overload protection (fig. 1). Fuse cuts power if the wheelchairs maximum consumption exceeds 50a the fuse is a circuit breaker that switches off at overload. To reconnected the fuse button is pressed which sits inside the shield (arrow a) figure...
Page 18
18 troubleshooting . Problem: cause: solution: the chair cannot run 1. Charging connector is connected to the control box. Remove the charging plug. 2. Motor brake is disengaged. Connect the motor brakes. 3. Other cause. Contact authorized service center. The chair drives slowly. Symbol appears in d...
Page 19
19 declaration of conformity manufacturer: ta. Service a/s Ømarksgården orupgade 32 b dk – 4640 faxe e-mail: ta-service @ta-service.Dk product: ta indoor wave elektric wheelchair iso klassifikation: iso 12 21 27 art.Nr.: 95162 the above aid is hereby declared to be designed and constructed in accord...