Tag770 user’s manual 16 notes notes route de lavérune montée du terral 34430 saint jean de védas france tel : +33 (0)4 67 27 43 05 fax : +33 (0)4 67 27 85 64 contact@tag-fr.Com www.Tag-fr.Com techniques audio groupe u s e r ’ s m a n u a l example of one tag770, front and backside, equipped with one...
Tag770 user’s manual 15 notes notes tag770 user’s manual 2 summary summary introduction introduction page 3 advice for a good use advice for a good use page 3 basic equipment basic equipment page 4 - on/off page 4 - mic/line input page 4 - tone adjustment page 4 - line output page 4 - power supply i...
Tag770 user’s manual 14 notes notes tag770 user’s manual 3 introduction introduction thank you for choosing tag770. To ensure the best performance and get the maximum life out of the equipment, we recommend that you read this manual carefully. Tag770 is a lightweight, portable, easy-to-use pa system...
Tag770 user’s manual 13 technical data technical data basic equipment basic equipment tag770 rms power 70 watts amplified speaker 1 full range loudspeaker 10" power requirements operates on ac 220v inputs mixable inputs: 1 rca line control input 1 mic control input on jack 6,35 switch on/off bands e...
Tag770 user’s manual 12 battery installation sm-5016 uses 2 pieces of " aa " size batteries (alkaline battery is recommended ). To install or remove the batteries, press the release buttons at the edges of the transmitter to open or close the cover as illustrated below. Hc-37 charger the beltpack tr...
Tag770 user’s manual 11 belt transmitter sm-5016 (uhf) belt transmitter settings 1. Making changes to channel / frequency press on set for 2 seconds in order to enter the settings use up or down button to go to the channel /frequency page. The cursor will flash to allow changes to be made. Pressing ...
Tag770 user’s manual 10 vhf or uhf belt transmitters corresponding to the wireless system the belt transmitter has to be a vhf or uhf transmitter. Belt transmitter m-1002 (vhf) input level gain control adjustment low-impedance "mt" gain control is situated inside the beltpack transmitter. Gain contr...
Tag770 user’s manual tag770 user’s manual 9 microphone settings 1. Making changes to channel/frequency press on set for 2 seconds in order to enter the settings use up or down button to go to the channel/frequency page. Pressing up or down button will increase of decrease the channel number. The cor...
