TAG 770 User Manual - page 6
TAG770 User’s Manual
11
BELT TRANSMITTER SM-5016 (UHF)
Belt transmitter settings
1. Making changes to CHANNEL / FREQUENCY
Press on Set for 2 seconds in order to enter the Settings
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page. The
cursor will flash to allow changes to be made. Pressing UP or DOWN but-
ton will increase or decrease the channel number. The corresponding fre-
quency will change accordingly. When a desired channel(frequency) is being selected, it will be
automatically saved and stored in the memory.
2. Input Level Gain Control Adjustment
Low impedance (Lo-Z) " MT" & high impedance (Hi-Z) " GT" gain controls are situated inside the
transmitter. Gain controls are adjustment ports that enable you touse microphones of differing
output levels and Guitar or instruments with Hi-Z output. To adjust microphone (Lo-Z) input
levels, turn the "MT" control and to adjust the Guitar or instrument (Hi-Z) input, adjust the "GT"
gain control to set the transmitter's desired audio input level.
3. Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page. Press SET for
about 2 seconds to activate the cursor. Press UP or DOWN button to move
the cursor to either NiMH (rechargeable battery) or AKLN (Alkaline bat-
tery) position.When the desired option has been selected, press SET for about 2 seconds to save
and store the data in the memory.
1. Antenna
2. Battery weak indicator
3. Audio mute switch
4. Mini-XLR connector
5. Power ON / OFF switch
6. LCD display
7. Charging port
8. Cover release button
9. Charging contacts
10. Lavalier microphone
11. Mic clip
12. SET
13. UP
14. DOWN
15. GT
16. MT
2
1
3
4
9
7
8
5
6
10
11
12
13
14
15 16
TAG770 User’s Manual
6
Keys
Explanation
Front Panel Remote
OP/CL
Open/Close the CD
Yes
PLAY
PAUSE
Starts music
Pauses music
Yes
Yes
CD/USB
Selects the player mode
Yes
Yes
STOP
Stops music
Yes
Yes
PROG
PROG : to make a selection of titles
To delete this selection, press STOP
Yes
Yes
ESP
FIND
For CD: ESP: Anti choc memory. Lasts 40 seconds
For USB key: FIND: Album search, ID3 tag (shows title
information)
Press “Find”: the current album appears on the display
Press once again “Find”: the trackname appears.
Press again and hold “Find” for two seconds: Number and
time of the song appears.
Yes
Yes
Rev - Skip-
CUE
Down-Rev
UP/CUE
Single and slightly pressed skips to previous (REV) or next
(CUE) track. If pressed again a little longer goes forward in
the track.
Play mode: The selected track starts playing
Stop/Pause mode: Skips to previous/next track.
Program mode: Skips to previous/next track according to
program selection
Yes
Yes
Pre Skip
Pre-Down
Pre-UP
USB mode: Folder skip function
Yes
Yes
REPEAT
Repeat off repeat all repeat album
Yes
MUTE
Fonction Mute: music stops
To get back to music, press again
Yes
INTRO
Intro: each title is being played for 10 seconds
Yes
RANDOM
Random play mode
Yes
0~10
Tape directly on the keyboard number of title + Play
Yes