TAG HDIT 2U Reference Manual - page 4
Features
The HDIT 2U 1GHZ PIII SERVER, as all products in the HDIT product line, is
specifically designed to provide unsurpassed performance and reliability where rack
space is very limited. The HDIT 2U 1GHZ PIII SERVER comes in a variety of configura-
tions and may have the following features:
•
2U heavy-duty industrialized 90-mil. rack-mount server chassis (24”x19”x3.5”)
•
28” slide rails with 6” extended
•
300W auto-switching power supply
•
2 high performance blowers for & thermal dissipation across the HDIT chassis
•
1 MHz. Pentium
®
III processor with 512KB high-performance cache
•
Genuine Intel
®
motherboard featuring the L440GX+ chipset
•
On-board dual-channel SCSI controller with SCSI Out
(If Equipped)
•
On-board 2MB SGRAM video adapter
•
On-board 100MB Fast Ethernet card
•
512MB 100MHz. SDRAM/ECC RAM, expandable to 2GB
•
(3) 18GB Ultra-Wide SCSI, hot-swap hard drives in a metal carrier & receiver
•
(1) 18GB Ultra-Wide SCSI, hot-spare hard drive in a metal carrier & receiver
•
PCI Ultra-160 SCSI RAID Controller with 32MB RAID Cache
•
Low-Profile Internal CD-ROM
•
External SCSI port
•
Fortezza Compliant PCMCIA Reader
(If Equipped)
•
3.5” 1.44MB Floppy Drive
•
1 year parts & labor warranty, and lifetime 24x7 telephone technical support
1
Rear Panel - Power Supply
Situated on the back of the HDIT 2U 1GHZ PIII SERVER is an Auto-Switching
115/230VAC power supply,
(See Figure 7).
The system main power switch is located
just beneath the power supply’s cooling fan. Turn off the main power switch and
remove the power cord from the HDIT 2U 1GHZ PIII SERVER before servicing or
moving the unit.
Rear Panel - Power Supply Specifications
INPUT:
115/230VAC
60/50Hz
10/5A
OUTPUT: 300W (Total Combined MAX)
(+5V/+3.3V Total MAX 140W)
OUTPUT:
+5VDC @ 30A
+12VDC @ 14A
-5VDC @ 0.3A
-12VDC @ 1.0A
+3.3VDC @ 22A
+5VDC @ 0.2A
6
Figure 7