TAG Heuer Aquaracer 500 M Instructions And Guarantee Card - Tag Heuer Aquaracer 500 M
5
TAG Heuer Aquaracer 500 M
Your new TAG Heuer Aquaracer 500 M has been designed and developed to satisfy the criteria of
quality and security required by professional divers. During a dive, the watch is more than a necessary
accessory – it is vital. Your TAG Heuer Aquaracer 500 M has been designed to be a constant reference
and the last reliable indicator when all other instruments have stopped.
– water-resistance to 500 m / 1640 ft
– automatic helium escapement valve
– screw-in crown
– folding clasp with push buttons and diving extension for steel models
– unidirectional turning bezel
– scratch-resistant sapphire crystal
– magnifying glass at 9 o’clock*
– luminescent hands and markers.
*According to model
CARING FOR YOUR TAG HEUER
Your TAG Heuer requires a certain amount of care. The following guidelines will enable you to ensure
its reliability and protect its appearance over time.
Rinsing. Please regularly rinse your watch in fresh water and soap, especially whenever you have
used it in salt water. For frequent or prolonged use in water, we recommend you opt for a steel and/
or gold bracelet. Remember that your watch is only water-resistant if the crown is correctly screwed
in* or pushed into the normal position.
Condensation. If the temperature changes suddenly, a slight condensation may appear under the
crystal of your watch. This mist will disappear by itself and will not affect the functioning of the watch.
If the condensation persists, please see your official TAG Heuer dealer.
Waterproofing seals. Over time, the waterproofing seals on your watch may deteriorate. We
recommend that you have the water-resistance of your watch checked once a year by your official
TAG Heuer dealer, who will replace the seals if necessary.
Crystal. The crystal in some of our watches is coated with a single or double anti-reflective treatment*
to improve readability. Wear and tear may cause marks to appear. These are considered normal and
are therefore not covered by the warranty. In normal conditions of use, the coating will be completely
satisfactory.