TAG Heuer Aquaracer 500 M Instructions And Guarantee Card - Automatic Gmt Watch*
AUTOMATIC GMT WATCH*
The GMT function shows the time in a second time zone, by means of a second hour hand and a
24-hour display on the dial.
a) The following changes can be made while maintaining the local time:
Manual rewinding
With the crown in position 1 you can wind your watch manually by turning several times the crown
clockwise.
Rapid correction of the date and second time-zone
Pull out the crown to position 2 and turn it anti-clockwise to advance the date.
Set the second time-zone by turning the crown clockwise. Position the GMT hand at the required
hour on the 24-hour dial.
N.B.: You can only adjust the second-time zone by full hours, and not 30 minutes time difference.
b) Changing local time:
Pull out the crown to position 3 and turn it in either direction to set local time.
Important: please remember to ALWAYS push the crown back to position 1 and screw it into position
0, if your watch has a screw-in crown.
*According to model
USING THE UNIDIRECTIONAL TURNING BEZEL*
The unidirectional turning bezel on your TAG Heuer, with its precision ratchet, is for the measurement
of dive time. The shape of the bezel is designed for easy hand rotation, even with diving gloves. For
safety, the bezel can only turn counterclockwise. If it is accidentally moved it will indicate a longer
elapsed dive time.
At the start of a dive, turn the bezel so that the zero mark is in front of the minute-hand (Fig. 2. ).
The minute-hand will always show the number of minutes that have elapsed since the dive started
(Fig. 3. : 30 minutes have elapsed since the start of the dive).
*According to model