TAG Heuer HL 680 User Manual - page 8
9. Accessories
• Battery Box – HL 680-8
• Antenna – Connector
• Nylon Case – HL 680-9
10.
Startup with Chronoprinter 540
• Ensure you have all the necessary cables:
• Configure the CP 540 as follows:
MENU
(F)
Æ Parameters Æ RS232 Æ To PC Æ 9600 Bds. with Flow Ctrl
See chapter 5.2.9 from Chronoprinter 540 user’s manual.
• Ensure that you connect the Radio to the PC 540 and switch ON before starting a
new RUN (from the CP 540).
Press the key
[ P0 ]
to test the connection between systems.
The message “CONNECT” is displayed if the radios are able to connect together.
If the message “FAILED” is showing, ensure that all systems are set to the same
frequency and the distance is not too big (or other interference).
In case of no communication during a race, you can re-initialised the system by
pressing the key
[ P1 ]
, (RESET) . All times not yet transmit are memorized into the
CP 540.
Trick: if you need to resend a time from a CP 540, use the function “Duplicate” from
the CP 540 menu.
Cable D-Sub 25p / Radio plug HL 680
Cable D-Sub 25p / RS 232