TAG Heuer Microtimer User Manaul - page 4
9
D e t a i l s o f t h e m o d e s a n d f u n c t i o n s
o f t h e p u s h b u t t o n s
T1 mode
Displays the hour (hour-minute-second)
and main date (day of the month; day of
the week). T1 mode indication for
3 seconds then AL if the alarm function
has been activated
(fig. 2).
By default, T1 is in the 24 hour mode.
If the AM/PM mode is defined, this
mode will be shown in the middle on
the right-hand side
(fig. 3).
In T1 mode, the functions of the push
buttons are:
A
short pressure = activation of screen
A
saver (screen off)*
B
= no function
C
= backlight for 6 seconds
D
short pressure = access to next mode
D
long pressure = setting the chosen mode
*
Note:
pressure on one of the four
push buttons exits the screen saver.
fig. 2
fig. 3
AL mode
Main time display, alarm clock time.
AL mode indication
(fig. 4)
for 3
seconds followed by alarm status
(ON-OFF).
The alarm will be displayed in AM/PM
mode or 24 hour mode depending on
the main time mode. If the AM/PM
indicator lights up, it refers to the
chosen alarm time
(fig. 5).
In AL mode, the functions of the push
buttons are:
A
long pressure = ON/OFF alarm
setting. A sound signal denotes ON
B
long pressure = activates the test alarm
clock sound
C
= backlight for 6 seconds
D
short pressure = access to next mode
D
long pressure = setting the chosen mode
The alarm sounds for one minute and stops when push button C or D is
pressed,
whatever the selected mode.
fig. 4
fig. 5
Hours
Minutes
Seconds
T1 Mode
Day of the week
Day of the month
AM/PM
Mode
Alarm
mode
AM/PM
mode