Power amplifier 60p power button power led l e f t c h a n n e l o u t p u t r i g h t c h a n n e l o u t p u t 220-240v ~ 50-60hz fuse: t4a l 250v serial number made in united kingdom power amplifier 60p i n p u t o u t p u t left right left right fuse carrier input sockets loudspeaker terminals (...
03 now, this blend of talent and expertise has been combined with the award-winning experience of audiolab to create a company with a technical advantage and access to resources second-to-none in the high end audio industry - tag mclaren audio. Tag mclaren audio has been created with one aim in mind...
We are convinced it will give you many hours of listening pleasure. The 60p is a powerful, high-quality stereo power amplifier with an output of outstanding clarity and purity. It complements our pa20r and pa10 preamplifiers in performance and appearance. The 60p is an ideal entry into the world of ...
Of signals picking up interference and to minimise the effects of intermodulation. Sophisticated muting the 60p has a sophisticated muting system, which stops you hearing loud, annoying switching noises and protects the amplifier and loudspeakers. Convenient connections a signal output is provided t...
‘straight line technology’ with direct coupled signal and feedback paths high-quality audio components precision metal-film resistors epoxy glass circuit board rated 60 w, typically 72 w into 8 Ω continuous (rated 95 w, typ. 115 w into 4 Ω and rated 130 w, typ. 150 w into 2 Ω for short periods) dupl...
Use high-quality loudspeaker cable terminated in bfa plugs (1) to connect the red terminal of your right loudspeaker to one of the red (2) terminals marked right channel output on the back of your 60p. Then connect the black terminal of your right loudspeaker to one of the black terminals marked rig...
Avoiding hum grounding your system the input left and right on the back panel of your 60p accepts the output of a high-quality preamplifier (such as our pa10 or pa20r) (1) . To simplify multiple power amplifier configurations, additional output left and right sockets are provided. These sockets are ...
The connection between your 60p and your loudspeakers is crucial to the sound quality of your entire audio system. Please follow these recommendations to achieve the best results. Your 60p is specified to operate with 8 Ω loudspeakers, but it can be used with 4 Ω loudspeakers. The 60p may also be co...
The simplest way to connect your loudspeakers is to run a single cable (consisting of two wires) to each one. For each stereo channel connect the red terminal on the loudspeaker to the red terminal on the 60p. Repeat for the black terminals (1) . If your loudspeakers have separate connections for hi...
To improve the sound further, you can use separate amplifiers for high and low frequencies. This will allow you to increase the volume without distorting the sound. As each amplifier is operating in a smaller bandwidth, intermodulation distortion may also be reduced. Connect the left and right outpu...
21 running in and warming up tag mclaren audio equipment is designed to give optimum performance for many years. Just like a high-quality car, the performance of your 60p will improve during the first few hours of operation. The electronic components will then have reached and settled down to near- ...
The only service you should do to your 60p is described on the left. All other servicing should only be carried out by one of our authorised service agents. If service is required, please contact your authorised tag mclaren audio retailer. If your 60p is still under guarantee, please refer to the gu...
Technical data 24 25 technical data this section is for those of you who really want to know the ‘insides’ of your 60p. You will not miss out on any of the functions or performance of your 60p if you choose not to read any further. 60 w per channel into rated load impedance (8 Ω ) 95 w into 4 Ω and ...
27 international standards technical data 26 power consumption dimensions (including feet, terminals and controls) dimensions (including feet, terminals and controls) 50 – 60 hz 110 – 120 v or 220 – 240 v the voltage is marked on the rear of the unit less than 300 w 445 mm wide 75 mm high 333 mm dee...
