TAG MCLAREN AUDIO 60P Owner's Manual - page 14
27
international standards
technical data
26
power
consumption
dimensions
(including feet,
terminals and controls)
dimensions
(including feet,
terminals and controls)
50 – 60 Hz
110 – 120 V or 220 – 240 V
The voltage is marked on the rear of the unit
less than 300 W
445 mm wide
75 mm high
333 mm deep
We reserve the right to alter design and specification without notice
Specification may vary for different countries
*115 V units are fitted with 4 mm terminals. They comply with 73/23/EEC, IEC65 and EN60065 in all other aspects
Your 60P meets or exceeds all the legal requirements listed below:
directives
safety
emc emissions
emc immunity
89/336/EEC
EMC Directive (as amended by 93/23/EEC)
* 73/23/EEC
Low Voltage Directive (as amended by 93/23/EEC)
* IEC65:
1985
* IEC65 A2:
1989
* IEC65 A3:
1992
* EN60065:
1993
EN50081 -1:
1992
EN55022 Class B:
1994
EN60555 -2:
1987
EN61000 -3-3:
1995
FCC Part 15 Class B: 1997
EN50082 -1:
1992
IEC801 -2:
1991 ± 8 kV air discharge
IEC801 -3:
1984 3 V/m
IEC801 -4:
1988 ± 1 kV AC power, ± 500 V other ports
EN61000 -4-2:
1995 ± 8 kV air, ± 4 kV contact discharge
EN61000 -4-4:
1995 ± 1 kV AC power, ± 500 V other ports
EN61000 -4-5:
1995 ± 2 kV common mode, ± 1 kV differential mode
EN61000 -4-11:
1994
ac supply
voltage
ac supply
frequency
The rated and typical performance applies when the mains supply voltage is either
230 V AC for 220 - 240 V units or 115 V AC for 110 - 120 V units
GRA00046.1-[CA]60P 12/03/01 16:52 Page 27