TAG MCLAREN AUDIO 700:7r Owner's Manual - S E T - U P
1 4
|
s e t - u p
You will require an av processor, such as the AV32R or a preamplifier, such as the DPA32R
to provide the signals to drive the 700:7r.
Each output is connected the appropriate RCA input on the 700:7r.
To connect the source equipment to the 700:7r you should use a hi-quality, well screened
RCA-RCA audio cable, such as our RCA/RCA F3-10-ANA interconnect. All the RCA-RCA
cables should be arranged so they are bundled as closely together as possible, especially at
the rear of the amplifier. This minimises the chances of loops of cable picking up magnetic
fields and possibly degrading performance.
Before making signal connections make sure the av processor/preamplifier and
all connected source units, such as a CD player are switched off and their mains
plugs have been removed from the wall sockets.
When you have completed the set-up and have connected all cables between all components,
ensure that the volume control on the av processor/preamplifier is set to minimum.
av processor or preamplifier connection
GRR01030.02-UK-7007r.qxd 10/22/03 3:07 PM Page 14