TAG MCLAREN AUDIO DPA32R Owner's Manual - page 13

analog inputs

|

25

The edited name will automatically be saved if you entered the last

and 16th character, alternatively leave the name editing menu with

return or press store. However, pressing the cancel key will leave

the menu without any change.

analog input sensitivity 

This menu is used to adjust the sensitivity of the analog inputs so that

each one is of a similar loudness to the others.

Select the desired sensitivity, between 0.1V and 3.0V using the

station + or station - keys. The new setting may be saved by

pressing the enter key. Pressing the cancel key will leave the menu

without a change.

All inputs are factory set to 2.0V input sensitivity.

24

|

analog inputs

The following text describes all properties you can change for each analog input:

name

This sub-menu allows you to change the names given to the

analog audio sources you have in your system (e.g. if you have a

second tape recorder connected to your aux input you may wish to

rename it ‘TAPE 2’ or you may like to change the ‘TV’ to

‘Television’)

(1)

. These names will appear in the display window of the

DPA32R

DAB

when you select the relevant input.

After pressing enter the first character illuminates, indicating the

cursor position. The cursor position may be changed using the

return (left)

(2)

or enter (right) keys.

The character under the cursor may be changed by direct entry

using the alphanumeric keypad. These are multi-function keys and

may require up to five presses to enter the correct character.

For example, pressing the 2 key once will change the character

under the cursor to an ‘a’. Further presses will cause the character to

cycle through the sequence ‘b’, ‘c’, ‘2’ and return to ‘a’. Upper case

letters may be entered by pressing the shift key

(3)

.

1. The DPA32R

DAB

is factory programmed with the names printed on the rear of the unit; e.g. the ANALOG INPUT labelled tv will appear as

‘TV’ on the front panel display when you select that input. Up to 16 alphanumeric characters, including spaces, can be entered for each

input.

2. Pressing return when the cursor is on the first letter will leave the name editing menu, accepting your changes. Press enter again if you

want to continue editing.

3. Pressing the shift key toggles between lower and upper case.

Name: Tape 2

Sensitivity: 2.0V

GRR00780.02-GB DPA32R v1.07.4  11/10/01  2:26 pm  Page 24