TAG MCLAREN AUDIO DPA32R Owner's Manual - page 15
display configuration
|
29
28
|
heading
28
|
T
AGtronic Sync Link T
2
L
The display properties which can be changed are, time that the display remains illuminated,
brightness levels and a personalised start up message.
Sync Link
The stability of the timing (called jitter) of digital data has a
dramatic effect on sound quality. When designing digital to analog converters, it is vital to
have a stable digital clock as close to the converter electronics as possible. The best place
for an ultra-low-jitter clock is within the DPA32R
DAB
itself, but it is conventionally located in the
source, for example the cd player, from which the digital data is sent.
setting the display brightness levels
You can define the brightness levels of the DPA32R
DAB
front display,
selectable when pressing the display key. There are four different settings, Max Brightness, Mid
Brightness and Low Brightness and off. Press menu then select Display, then the brightness level
you want to configure. Press enter to select, station + or station - to increase or decrease the
brightness. 1 is low, 10 is high. Enter confirms your selection. Press return or menu to leave the
menu accepting your choice or cancel to disregard your selection.
setting the ‘On Time’ for the front display
This menu sets the On Time the front display will be switched on,
after a key on the remote or a button on the DPA32R
DAB
is pressed. After that time interval the
display switches off.
To change press menu, select the Display menu, then select the On Time sub-menu. Select the
property by pressing enter, then scroll through all options using the station + and station - keys.
Press enter to select your desired option. Press return or menu to leave the menu accepting your
choice or cancel to leave without a change. The factory default setting is Always On.
personalised message
You may program in your own welcome note. This message is
shown whenever the DPA32R
DAB
is powered up. After pressing
enter, the first character illuminates, indicating the cursor position. The cursor position may be
changed using the enter (right) or return (left) keys.
The DPA32R
DAB
incorporates sophisticated
electronics, called TAGtronic
Synchronisation Link T
2
L which enable it to
‘drive’ the source clock of products
equipped with this advanced technology
(1)
to replace the source unit’s clock by the
DPA32R
DAB
clock. In doing this the jitter in
the digital audio data is reduced and
sound quality significantly enhanced.
To enable the TAGtronic
Synchronisation Link the sync
output (rear panel) must be
connected to the appropriate
sync input of the digital audio source.
On Time: 3seconds
Max. Brightness: 9
Messa ge: My DPA32R
Use a high-quality analog interconnect,
such as our F3-10-ANA cables. Activate
the TAGtronic Synchronisation Link by
pressing menu, select Digital Inputs by
pressing station +, finally select an input,
then change the Sync Link property to On
(using enter and station +).
The factory set default for all digital inputs
is off.
Sync Link: On
1. Digital sources with a compatible ‘sync input’ include our CD transport CDT20R T
2
L and DVD player DVD32R.
GRR00780.02-GB DPA32R v1.07.4 11/10/01 2:26 pm Page 28