TAG Nomade User Manual - page 4
Nomade User’s Manual
7
Nomade User’s Manual
6
OPTION NOMADE
OPTION NOMADE
RECEIVER SDR-6216M
The NOMADE can be equipped with one wireless system. It can be used for the han-
dheld MIC/Transmitter or to link Nomade to another sound system e.g. Xpresso, Flash.
Technical caracteristics of receiver SDR-6216M
UHF receiver, True Diversity, with Pilotone.
3 Switch on the receiver:
The switch on the right is power switch and volume control
3 Switch on the handheld microphone/beltpack transmitter:
The LEDS A and B are lightning when the UHF link between transmitter and receiver is ok.
Channel can be changed with the switch on the left side.
HANDHELD TRANSMITTER MICROPHONE SQ-5016
The microphone is equipped with 16 frequencies
1. Microphone capsule
2. Battery status led
3. Power switch (ON/OFF)
4. LCD display
5. Battery compartment
6. Rotative protective cap for controls
7. Lock/Unlock
8. Set
9. UP
10.DOWN
11.Charging Port
12.Name plate
On/Off + Volume
Selection of the channel
LED A et B
Microphone settings
1. Making changes to CHANNEL/FREQUENCY
Use UP or DOWN button to go to the Channel/Frequency page. Pressing UP or DOWN button will
increase of decrease the channel number. The corresponding frequency will change accordingly.
When a desired channel is being selected, it will automatically be saved and stored in the memory.
2. Making changes to SENSITIVIY
Use UP or DOWN button to go to the Set page.. Use UP or DOWN to decrease or increase sensiti-
vity. Level: 1 - 4 . for singing, Level 4 for speech or if microphone is used with a tripod stand
3. Making changes to battery selection
Use UP or DOWN to go to the Battery selection page.
Press UP or DOWN to move the cursor to either: NiMH (rechargeable battery) or AKLN (alkaline).
When the battery has been selected it is saved and stored in the memory
Changing Batteries
2 pieces of AA batteries are used. Unscrew the tap of battery compartment and insert the new batte-
ries. BEWARE OF THE POLARITY
BELT TRANSMITTER SM-5016
501
6
1. Antenna
2. Battery weak indicator
3. Audio mute switch
4. Mini-XLR connector
5. Power ON / OFF switch
6. LCD display
7. Charging port
8. Cover release button
9. Charging contacts
10. Lavalier microphone
11. Mic clip
12. SET
13. UP
14. DOWN
15. GT
16. MT
2
1
3
4
9
7
8
5
6
10
11
12
13
14
15 16