Taiden TMX-0404SDI Installation And Operation Manual - page 14
2. Switch through
Switch through one input channel or all input channels
to corresponding output channel(s).
Example:
Switch through channel 2.
3. Close
Close one output channel or all output channels.
Example:
Close output channel 2.
4. Save scene
Save current video signal to appointed scene. 10
scenes can be saved at most, each scene has a
number, from 0 to 9.
Example:
Save scene 3
5. Recall scene
Recall video signal from selected scene.
Example:
Recall scene 3
1. Press “MENU”, and press “Õ/Ö” until
“Recall scene” prompts;
2. Press “MENU” to enter “Recall scene”;
3. Press “Õ/Ö” select scene number “3”;
4. Press “MENU” to confirm.
TMX-0808SDI
Version: 2.10
Recall scene:
Recall scene:
▋
0
Switch OK !
3
Recall scene:
▋
3
1. Press “MENU” and press “Õ/Ö”until “Save
scene” prompts;
2. Press “MENU” to enter “Save scene”;
3. Press “Õ/Ö” to select scene number “3”;
4. Press “MENU” to confirm.
TMX-0808SDI
Version: 2.10
Save scene:
Save scene:
▋
0
Save scene OK !
3
Save scene:
▋
3
1. Press “MENU” and press “Õ/Ö” until
“Close” prompts;
2. Press “MENU” to enter “Close”menu;
3. Press “Õ/Ö” to select channel “2”;
4. Press “MENU” to confirm.
TMX-0808SDI
Version: 2.10
Close
Close
▋
1
Switch OK !
2
Close
▋
2
1. Press “MENU” and press “Õ/Ö” until
“Switch through” prompts;
2. Press “MENU” to enter “Switch through”;
3. Press “Õ/Ö” to select channel “2”;
4. Press “MENU” to confirm.
TMX-0808SDI
Version: 2.10
Switch through:
Switch through:
▋
1
Switch OK !
2
Switch through:
▋
2
Note:
)
Select “ All ” standing for switch through all
channels.
Note:
)
Select “ALL” stands for closing all channels.
8