Summary of Ti-2
Page 1
Operating instructions sake warmer ti-2.
Page 2: Contents
-2- warning: to prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The lightning flash with arrowhead symbol, wi...
Page 3
-3- safety precautions warning the following 11 items concern the possibility of the user's death or serious injuries if the user operates the product without observing the warnings or in the wrong way. (1) install the product at a horizontal, stable place, and be sure to secure it with the fixing a...
Page 4: Purpose of Use
-4- (8) be careful of changes in sake warming tempera- ture, which is subject to change depending on sampling frequency and sake temperature. Continual sampling will gradually lower sake warming temperature. (9) be careful of the water level meter for the warm- ing tank. Sake warming performance wil...
Page 5: Operation
-5- the product is an indirect heating type electric sake warmer in which the water in the warming tank is heated by a heater and in which sake flows through the titan heat-exchanger pipe heated by the water. Warming temperature is adjusted by controlling the warming tank temperature with a temperat...
Page 6
-6- inspection and installation before use 1. Take the product out of the package, and check the manual for operating instructions, and accessories. 2. Install the product at a place which meets the following conditions. • horizontal and stable • well-ventilated • free from heat effects. Avoid expos...
Page 7: Instructions For Use
-7- instructions for use * read [inspection and installation before use], page 6, and install the machine properly before using it. Preparations 1. Insert the power plug into an electrical outlet. 2. Check the water level meter pipe that it is fixed. 3. Check the water level meter for the level of w...
Page 8
-8- 6. Switch power on and turn the temperature knob to your desired temperature position. (figure 6) • one graduation corresponds to about 4°c. • if a temperature higher than the sake warming tank is set, the heater lamp lights, indicating that the heater begins to heat. The heater lamp goes out wh...
Page 9: After Use
-9- after use 1. Discharge sake from the machine. (1) have a container ready, and discharge the sake out of the sake tank through the sake drain cock into the container. When the sake tank is empty, return the sake drain cock to the closed position. (see the sake discharging method on page 8. (2) pu...
Page 10
-10- after-sale service ・for after-sale service, ask your dealer or taiji & co., ltd. ・components and parts of this product will be available for five years after the production of this product has ceased. For your direct contact with taiji & co.: 8-2, okawa-cho, kawasaki-ku, kawasaki, 210-0858, jap...
Page 12
Taiji & co., ltd. Kawasaki, japan (0803c) printed in japan.
Page 13
酒燗器部品リスト 機種 :ti-2 ti-2, sake warmer dispenser parts list no 部品名 parts name 1 2 3 酒燗パイプ sake pipe 4 5 6 7 8 9 10 11 水位計取付金具 warter level meter fitting 12 13 14 15 ﾉｽﾞﾙ組立 nozzle assembly 16 17 18 19 20 21 Ａ 貯酒ﾀﾝｸ組立 (no.22-24含む） sake tank assembly (including#22-24) 22 フィルタ- filter 23 空気補給蓋 air feeder c...
Page 14
35 36 ﾉｽﾞﾙカバー nozzle cover 37 銚子台 sever bottle tray 38 ジョーゴ funnel 39 転倒防止金具 fixing agnle (2pcs.) 40 41 オリフィス orifice 42 43 水位計 water level meter pipe 44 45 46 ｼﾘｺﾝ栓（水位計用） water level meter cap 47 48 49 50 51 52 53 54 55 56 57 ptcﾋｰﾀｰ ptc heater 58 サーモ80℃ thermostat 80℃ 59 トグルｽｲｯﾁ (on/off) toggle sw...
Page 15
75 76 77 78 79 80 81 82 ｽﾃﾝﾕﾘﾔﾈｼﾞ（銚子台取付） screw for server bottle tray 25-oct-07 taiji & co., ltd..
Page 17
・to enjoy your sake, have the dispenser cleaned at least once a week. Otherwise, it will cause change in the taste of sake and malfunction of the dispenser. ・upon the cleaning, please have the lid and filter washed with hot water. １． feed the remained sake in the sake tank to a sake server bottle. C...