Tait TM9100 User Manual

401-00007-00

www.taitworld.com

TM9100 mobiles

TP9100 portables

TM9100 and TP9100 User’s Guides

Insert Sheet

1 Introduction

This insert sheet contains information about 

enhancements to the operation of TM9100 mobiles and 

TP9100 portables. The topics covered in this 

document are:

■

additional compliance information (TP9100 only)

■

using encryption

■

voting operation.

2 Additions to “For your safety” chapter (TP9100 only)

The following compliance information has been added.

USA public safety bands (764–776MHz and 794–806MHz)

Part 90R of the FCC Title 47 of the Code of Federal Regulations (CFR) deals with the use 

of frequencies in the 764 to 776MHz and 794 to 806MHz bands.

Low-power channels

This radio complies with §90.531 (b) (3) and §90.531 (b) (4) of 47 CFR. These sections 

state that only low-power transmission is permitted on the following channels:

■

Regional Planning channels, as defined in §90.531 (b) (3).

■

Itinerant channels, as defined in §90.531 (b) (4).

Use of encryption

This radio complies with §90.553 (a) of 47 CFR. This states that:

■

Encryption is not permitted on the nationwide Interoperability calling channels.

■

These channels are defined in §90.531 (b) (1) (ii).

■

Radios using encryption must have a readily accessible switch or control to allow the radio 

user to disable encryption.