Taizhou Tianchen Intelligence & Electrics L2700 User Manual
Summary of L2700
Page 1
Please read this manual carefully before use please keep this manual for future reference rohs robot mower user manual.
Page 2
T thank you for purchasing our product. We know that you will enjoy the extra free time you will have while using our robot lawn mower to mow your lawn. You will be impressed with your lawn's appearance and vest of all, 2000series did it for you. Important! Robot lawn mower can be dangerous if incor...
Page 3
Contents 1. Introduction and safety······················································p1 2. Presentation··········································································p7 3. Installation···········································································p15 4. Control panel and r...
Page 4
1.1 introduction product, product specifications and this document are subject to change without notice. All other trademarks are property of their respective owners. The lawn mower may be used only by those who know how to operate it after reading and understanding the instructions in this manual. ...
Page 5
1.Introduction and safety this label is pasted on charging station, please make sure to position this side towards lawn interior. Failure to do may result in damage to property or persons. Danger! Sharp rotating blades. Keep hands and feet away. Serious injury can occur. Danger 3. Specifications sym...
Page 6
1.Introduction and safety 1.4 safety instructions - read the owners/operation manual carefully and follow all the safety and warning instructions. - this machine has sharp rotation blades! Never allow the mower to operate unattended; keep bystanders, children and pets away from mower when in operati...
Page 7
2. Presentation 2. Presentation this chapter contains information you should be aware of when planning the instalation. 2.1 what's in box 1 2 8 6 3 5 4 7 9 12 13 11 16 10 15 14 17 18 20 21 22 23 2 4 9 consumable parts 1. Blade 2. Virtual wire 3. Virtual wire connectors 4. Pegs 5. Fuse 1 clamshell: o...
Page 8
2. Presentation 2.2 function of 2000series - lift sensor there are lift sensors located on each omni-directional wheel. If the mower was lifted 2cm from the ground in level way, it will stop working within 2 seconds. - tilt sensor there is tilt sensor installed on the mower too, when the mower was t...
Page 9
2. Presentation - the robot lawn mower can't operate without a virtual wire. (we suggest to use 100m-300m of virtual wire). It leads the mower back to charging station and the mower will take it as a wall when it is operating. It will get on the virtual wire until it meets charging sheet which local...
Page 10
2. Presentation around virtual wire walking option virtual wire has be cut intelligent lawn testing rain sensor auto recharge intelligent spiral go straight anti theft lift sensor tilt sensor ultrasonic wave bumper sensor led display waterproof human sensor time set-up system emergency switch set up...
Page 11
3. Installation 3. Installation this chapter describes how you install this mower. Before starting the installation read the previous chapter 2. Presentation. Read the whole of this chapter too before starting the installation. How the installation is made also affects how well the mower will work. ...
Page 12
3. Installation 3.3 charging station installation - choose best installation place, please make sure which is flat, no water, no magnetic interference and no obstacle in the front of charging station. - please fix the charging station in level place. Ok charging station best install place: 1. Make s...
Page 13
3.4 virtual wire installation the virtual wire can be installed in one of the following ways: - securing the wire to the ground with staples. It is preferable to staple down the virtual wire, if you want to make adjustments to the virtual wire during the first few weeks of operation. - bury the wire...
Page 14
- if a high obstacle, for example a wall or fence, borders the working area, the virtual wire should be laid at least 50cm from the obstacle. This will prevent mower from colliding with the obstacle and reduce body wear. - use the virtual to demarcate areas inside the working area by creating island...
Page 15
3. Installation 45° rain shed greater than 50cm - how to set virtual wire on the ground which has swimming pool. Distance between two wire: 1m 3. Installation - joining the boundary wire . If the boundary wire is not long enough and needs to be spliced: use original solderless couper. It is waterpro...
Page 16
3. Installation 3.5 virtual wire and charging station connecting - connect two ends of virtual wire to patch jack (virtual wire terminal located on charging station) randomly, there is no positive and negative. 3.6 power connection 1. Insert charger to the station. 2. Connect charger with power supp...
Page 17
3 power switch: power on/ power off 4 up / + : there are tree functions for this button. -select menu, go upward -select menu, go left -select figure, means + 5 confirm button -to confirm your choose or enter. 6 down / - -select menu, go down -select menu, go right - select figure, means - 5. Use 5....
Page 18
- on multi-spindle appliances, take care as rotating one blade can cause other blades to rotate - connect two terminals of virtual wire to charging station, and ensure virtual wire is in good connecting. (light on charging station is in colorless). - insert charger to charging station and screw it. ...
Page 19
Robot mower main menu clock code time auto manual other input password set password mon,tue,wed,thu,fri,sat,sun wave line rain wave line rain code exit on off on off on off on off month date week hour date wave line rain input password set address 5. Use address del esc set start end hour min hour m...
Page 20
4. To set hour and minute. - press or to scroll the correct hour and press to confirm it. - the moves to minute. Press or to scroll the correct minute and press to confirm it. 5. Return back to menu automatically. Arrow 5.8 password setting 1. Select code from menu and enter it. 2. Enter initial pas...
Page 21
2. Select tue by press or and enter it by press . (take tue for example) 3. Display means. Del: to delete working schedule which has already set. Esc: to esc from working schedule setting. Set: to set or working schedule setting. 4. Select set and press to enter working schedule setting. 5. To set s...
Page 22
5.12 other setting enter other menu there are 5 options, wave, line, rain, code, exit. Factory setting of the mower: wave: on line: on rain: on code: on 1. Wave wave: on, ultrasonic sensors functioned. Wave: off, ultrasonic senors default. Setting steps: - select other and press to enter it. - selec...
Page 23
5. Use 4.Code it’s about password setting. Code: on, every time the mower starts, user has to enter password. Code: off, user does not need to enter password each time when it starts. Setting steps: - select other and press to enter it. - select code and press to enter it. - press or to select “on” ...
Page 24
5. Use 5.13 recharging - the mower could goes back to recharging automatically if it is power less. Or press the home button on the charging station, the mower also goes back to station for recharge. - the mower also can recharges by charger directly. Steps as follow: 1. Press the clamshell and open...
Page 25
6. Maintenance and storage 7. To remove the deposits and/or other residues from the blade, use a suitable brush. 8. Clean the outside of the charging station from any accumulated residues. 9. Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition. 10. Replace wor...
Page 26
6. Maintenance and storage 6.5 battery the battery is maintenance-free, but has a limited life span of 1-3years. Battery life is dependent on the length of the using season and how many hours per week the robot is used. A long season or many hours of use per week, means that the battery must be repl...
Page 27
Mower stop working and beeping. Mower stop working and beeping. Mower stop working and beeping. Mower is tilted over than 30 degree from the ground put the mower in lever ground, turn off the mower and restart it by enter password and choose operate pattern. 1. Cutting height too low. 2. Blade or ru...
Page 28
Power is not fully charged for operation the ground before the charging station is not flat. Short run time, operates less time than normal mower does not detect the charging station contacts. Recharge the mower fully. Reset the charging station in a flat place. Terrain needs landscaping repairs. Ob...
Page 29
4. Damaged running motor grass too high 4. Get the motor repaired or replaced by service station . 5. Increase the cutting height or use a normal lawn mower. The robot is very noisy 7. Trouble shooting problem display solutions possible reasons - p51- 1 2 3 4 5 6 7 1.Top cover 2.Pcb 3.Power terminal...
Page 30
1 40 41 42 43 44 45 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 emergency switch indicator dial adjusting knob ultrasonic base ultrasonic sensors clamshell clamshell platen rain sensors rain sensor base up cover flat cable middle cover ba...