Taizhou Tianchen Intelligence & Electrics TC-G158 with lead-acid User Manual - page 15
-P26-
-P25-
5. USE
5. Use
IMPORTANT INFORMATION
Operation with Auto Pattern
- Do not leave the machine to operate unattended if you know that there
are pets, children or people in the vicinity
Operation with Manual Pattern
- Mow only in daylight or in good artificial light.
- Avoid operating the appliance in wet grass.
- Do not operate the appliance when barefoot or wearing open sandals.
- Always wear substantial footwear and long trousers.
- Always be sure of your footing on slopes.
- Use extreme caution when reversing the appliance towards you.
- Always switch on the mower according to instructions with feet well
away
from the blade.
5.1 Preparation
- Ensure the correct installation of the virtual wire delineation system as
instructed
- Periodically inspect the area where the appliance is to be used
and remove all stones, sticks, wires, bones, and other foreign
objects especial the objects' height is less than 6cm.
- Periodically visually inspect to see that the blades, blade bolts and
cutter assembly are not worn or damaged. Replace worn or damaged.
Read the safety instructions before you start your mower.
Keep your hands and feet away from the rotating blade.
Never put your hands or feet close to or under the body when
the motors are running.
WARNIN
WARNIN
- On multi-spindle appliances, take care as rotating one blade can
cause other blades to rotate
- Connect two terminals of virtual wire to charging station, and ensure
virtual wire is in good connecting. (Light on charging station is in
colorless).
- Insert charger to charging station and screw it. And then connect
charger to power supplier. Ensure charging station is in good
connecting, light on charging station is in Green.
1.Take the mower to start point.
2. Turn the key switch on.
3. Clockwise rotate Emergency switch,
4. The mower start.
5.2 Starting the mower
5. USE
blades and bolts in sets to preserve balance.
IMPORTANT INFORMATION
User can't start the mower if virtual wire and charging
station has problem.
Start point