Takstar X6 User Manual - page 4
(1)
(2)
(2)
(3)
(4)
(3)
DC INPUT
ANT B
SENSITIVITY B
BAL B OUT
MIX OUT
BAL A OUT
SENSITIVITY A
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ANT A
(6) (7) (8) (9) (10)
(7)
(8)
(9)
12V 600mA
(5)
3
8
If the frequency is set appropriately, up to 12 transmitters can be used in the same frequency
band; if the frequency is set inappropriately, mutual interference will be caused.
When several systems are used at one venue, please avoid overlapping the receivers.
Receiver Function and Operation
Front Panel
Rear Panel
(1) On/off power switch: press to turn on/off. The LCD lights when it is turned on.
(2) Volume control: adjust the output volume.
(3) Function buttons: adjust frequency, lock the frequency function key and automatically scan
the frequency.
(4) LCD: indicate working status, frequency/channel, squelch, signal level and audio dynamic
level.
(5) Infra-red data synchronization window: transmitting frequency specification signal to
transmitter by pressing “ACT”.
(6) Power socket: connect 12V DC power to the socket. Central electrode of socket connects
positive voltage.
(7) Antenna input socket: connect antennas for longer operating range.
(8) Sensitivity adjustment: the adjustment range is 0-10dB. The smaller value, the lower
sensitivity and shorter distance but with stronger interference rejection capacity, and vice
versa.
(9) Balanced audio output: XLR socket, two independent signal outputs.
(10) Unbalanced audio output: P socket, two mixed signal outputs.
Trouble Shooting
Troubles
Possible reasons
No indication on transmitter and
receiver
No RF signal on receiver
With RF signal, but without audio
signal
Running out of batteries or bad connection between
receiver and power supply
Frequency of transmitter and receiver is not the same or
out of operation range
The capsule of transmitter is broken or not well connected;
the squelch of receiver is too high and lead to short
operating range
Background noise of audio
signal is too loud
Audio signal distortion
Operating distance is too short,
signal is not stable
Output level of receiver is too low; there is interference
signal around or antenna on receiver is not installed
Transmitter's modulation frequency deviation is too
high; output level of receiver is too high
Squelch of receiver is too high; receiver antenna is wrongly
placed; there is a strong electro-magnetic interference
around
If there are other troubles, please contact us or your local distributor. Please do not
dismantle the product as it will void warranty.
Maintenance
Do not keep or use the system in high humidity, high electromagnetic or high temperature
environment, please take out the batteries and unplug the power adaptor if not used for a long
time.
Cleaning: please unplug the adaptor before cleaning and clean it with wet cloth. To protect the
do not use any detergent or dissolved liquid.
Power supply: make sure the power supply is within the required range, too high or too low will
affect the performance. Please place the batteries into the transmitter according to correct polarity.
Maintenance: if there are any troubles of the system, please contact your local distributor for
maintenance. Please do not dismantle the products as it will void warranty and be harmful to
yourself.
Accessory: please use the accessories supplied by manufacturer or recognized accessories to exert
the best performance.
Warranty: any dismantling without authorization may lead to cancellation of the warranty.