Talon Tools AC3102-55SC User Manual

MODEL NO. AC3102-55SC/AC310220S

USER MANUAL 

Petrol Chain Saws

43Þ

CKA

SAFETY OPERATION MAINTENANCE

WARNING • PLEASE READ

Beware of kickback. Hold chain saw firmly with both hands during use. For your own safety, please

read and follow the safety precautions in this manual before attempting to operate your chain saw.

Improper use can cause serious injury.

This product has been tested at a computed kickback angle (CKA) of no greater than 43 degrees.

9096-31B203

C H A I N   S A W   W A R R A N T Y

The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of

this product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation

of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520

939)(the “Company”) to be free from defects in material and workmanship for a period of 24 months from

the date of original purchase. The Company during the period of the warranty, will at its option, and sub-

ject to the conditions stated herein, repair or replace without charge this product or any component part,

which upon examination by an Authorised Service Agent or by the Company is found to be defective.

Warranty conditions

This warranty will not apply:

(i)  where this product has been subjected to misuse, abuse, accident or want of care; 

(ii) where this product has been used for a purpose for which it was not designed or is not suited; 

(iii) where the service of this product has been undertaken by a person not authorised by the Company

to carry out such work or where parts that have not been approved by the Company have been used;  

(iv) where this product has  been used for industrial purposes. 

Should service become necessary during the warranty period, the purchaser should contact an Authorised

Service Agent or the Company. In order to obtain warranty service, the purchaser must present the store

receipt showing the name of the retailer and the date of purchase together with a completed Warranty

Card. The period of the warranty begins from the original date of purchase, notwithstanding any  subse-

quent repair or parts replacement. No additional warranty or guarantee other than set out in this document,

whether written or verbal, is authorised to be made on the Company's behalf. The purchaser shall be

responsible for delivery or causing the product to be delivered to the Company or the Authorised Service

Agent and  the purchaser shall be responsible for all charges in connection with re-delivery of the product

and/or the delivery of parts. Damage in transit is not covered by this warranty and purchasers should

remove from the product any liquids (if applicable) before sending and pack the product securely to pre-

vent damage.

Warranty exclusions

Normal wear parts or components are subject to seperate terms as follows: Normal wear parts, compo-

nents or service required when performing normal and regular maintenance of this product are not covered

by warranty unless it is found to be defective by an Authorised Service Agent or by the Company. Normal

wear parts include, but are not limited to:

Chains.

Chain Bar.

Spark Plugs.

Carburetor Adjustments.

Lubricants.

Engine Tune-ups.

Filters.

Returns based on the above listed normal wear parts will not be accepted under this warranty as they

are considered consumable items and are at the expense of the purchaser. 

WARRANTY INFORMATION

AU

1