Talon Tools AC3102-55SC User Manual - page 3
5
AU
GENERAL INFORMATION
1
2
3
4
6
7
5
17
11
8
16
18
20
10
12
13
15
9
19
14
1.
Guide Bar
2.
Saw Chain
3.
Saw Chain Adjustment Screw
4.
Spark Arrester Screen
5.
Chain Brake Lever/Hand Guard
6.
Front Handle
7.
Starter Handle
8.
Spark Plug
9.
Air Cleaner Cover
10. Stop Switch
11. Safety Trigger
12. Bar Oil Tank Cap
13. Starter Cover
14. Fuel Tank Cap
15. Rear Handle/Boot Loop
16. Throttle Latch
17. Choke Lever
18. Bar Retaining Nuts
19. Throttle Trigger
20. Chain Catcher
21. Chain Brake Cover
22. Combination Wrench
23. Carry Case
24. Guide Bar Cover
• SAFETY FEATURES
2. LOW KICKBACK SAW CHAIN helps significantly
reduce kickback, or the intensity of kickback, due to
specially designed depth gauges and guard links.
3. CHAIN SAW ADJUSTMENT SCREW It is normal for
a new chain saw chain to stretch after the first 30 min-
utes of use. Check the tension of the chain regularly
to ensure the best performance, see SAW CHAIN
ADJUSTMENT under MAINTENANCE AND REPAIR
INSTRUCTIONS.
5. CHAIN BRAKE LEVER / HAND GUARD protects the
operator’s left hand in the event it slips off the front
handle while saw is running.
CHAIN BRAKE is a safety feature designed to reduce
the possibility of injury due to kickback by stopping a
moving saw chain in milliseconds.
It is activated by the CHAIN BRAKE lever
10. STOP SWITCH immediately stops the engine when
pushed up. Stop switch must be pushed down to start
or restart engine.
11. SAFETY TRIGGER prevents accidental acceleration
of the engine. Throttle trigger (19) cannot be
squeezed unless the safety trigger is depressed.
17. CHOKE LEVER aids in starting the engine.
19. THROTTLE TRIGGER controls engine speed.
20. CHAIN CATCHER reduces the danger of injury in
the event saw chain breaks or derails during opera-
tion. The chain catcher is designed to intercept a
whipping chain.
22
21
24
4
AU
Model No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AC3102-55SC
Engine Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55cc (3.36 cu-in)
Maximum Shaft Brake Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 kW
Cutting Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20” (50cm)
Chain Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.325”
Chain Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.050mm
Idle Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3,200-4,400 min
-1
.
Speed in Max power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9,000-13,000 min
-1
Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 ml
Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250 ml
Anti Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Super Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Sprocket Tip Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Teeth
Chain Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Automatic Chain Oiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Lower Kick Back Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.31 kg
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 dB(A)
Sound power level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 dB(A)
Mean braking time at racing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.07s
SPECIFICATIONS
23
4.
Cut at high engine speeds.
5.
Do not overreach or cut above shoulder height.
6.
Follow manufacturer’s sharpening and maintenance
instructions for the saw chain.
7.
Only use replacement bars and chains specified by
the manufacturer or the equivalent.
• MORE ABOUT KICKBACK
KICKBACK may occur when the NOSE or TIP of the
guide bar touches an object, or when wood closes in and
pinches the saw chain in the cut.
Tip contact in some cases may cause a lightning-fast
reverse reaction, kicking the guide bar up and back
toward the operator.
PINCHING the saw chain along the BOTTOM of the
guide bar may PULL the saw forward away from the oper-
ator. PINCHING the saw chain along the TOP of the
guide bar may PUSH the guide bar rapidly back toward
the operator.
Any of these reactions may cause you to lose control of
the saw, which could result in serious personal injury.
• KICKBACK SAFETY LABELS (FIG. 2)
Your Talon Chain Saw is provided with a safety label
located on the chain brake lever/hand guard. This label,
along with the safety instructions on these pages, should
be carefully read before attempting to operate this unit.
RECOMMENDED
Recommended cutting procedure.
GREEN
WARNING: Kickback can lead to dangerous
loss of control of the chain saw and result in
serious or fatal injury to the saw operator or to
anyone standing close by. Always be alert.
Rotational kickback and pinch-kickback are
major chain saw operational dangers and the
leading cause of most accidents.
IMPORTANT SAFETY
Fig. 1A
A
A
B
A
A
B
C
Fig. 1B
BEWARE OF:
ROTATIONAL KICKBACK THE PUSH
(FIG. 1A)
(PINCH KICKBACK)
AND PULL REACTIONS
(Fig. 1B)
A = Kickback path
A = Pull
B = Kickback reaction zone B = Solid objects
C = Push
WARNING: RED Used to warn that an
unsafe procedure should not be performed.
1
3
2
4
Fig. 2
WARNING
1. Beware of kick back.
2. Do not attempt to hold saw
with one hand.
3. Avoid bar nose contact.
RECOMMENDED
4. Hold Saw properly with both
hands.