TAMASHI XTD-168USB User Manual And Installation Instructions - page 23
GB-22
2. The unit cannot play a CD-R and CD-RW that is not finalized. (Please refer to the manual of your CD-R/CD-RW recorder or
CD-R/CD-RW software for more information on finalization process).
3. Depending on the recording status, conditions of the disc and the equipment used for the recording, some CD-Rs/CD-RWs
may not be played on this unit (see *1)
*1: To have more reliable play back, please see following recommendations:
a. Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x.
b. Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x.
c. Do not play a CD-RW which has been written more than 5 times.
d. The car radio supports discs which comply with the ISO 9660 level 1 or level 2 format, or the Joliet or Romeo format.
1. When naming a MP3 file, be sure the file name extension is 'MP3'.
2. For a non-MP3 file, even though the file name extension is 'MP3', the unit cannot recognize it.
-
.
- Do not place stickers or make scratches on discs.
- Do not warp discs.
- A disc should always be kept in its case when not in use to prevent from damage.
- Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
C. Notes on MP3 files
D. Handling and Cleaning
.
Dirty, dusty, scratched and warped discs will cause malfunctions
A. Notes on discs:
B. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable CDs):
1. Attempting to use non-standard shape discs (e.g. square, start, and heart) may damage the unit. Be sure to use round
shape CD discs only for this unit.
2. Do not stick paper or tape, etc, onto the label side or the recording side of any discs, as it may cause a malfunction.
1. Be sure to use discs with following marks only for the unit to play:
Dirty, dusty, scratched and warped discs will cause a malfunction.
DISC NOTES