Tamron A061 Specifications - page 4
■
■
Exclusively for digital
NOTE : Vignetting occurs when pictures are taken with a Di-II lens mounted on a 35mm fi lm camera or a digital SLR camera with
an image sensor larger than 24 x 16mm.
For fi lm & digital
Designed for use with both 35mm fi lm and digital SLR cameras.
Di lenses are designed to fit the characteristics of digital cameras as well as film cameras by incorporating
countermeasures against ghosting and fl are through such advances as special coatings.
SP AF17-35mm Di
(Model A05)
SP AF28-75mm Di
(Model A09)
SP AF90mm Di
(Model 272E)
SP AF180mm Di
(Model B01)
SP AF200-500mm Di
(Model A08)
*The angles of view obtained by a "Di " lens mounted on a digital camera with a smaller-size imager differ from
those obtained by the same lens mounted on a 35mm fi lm camera.
(Model A061)
AF28-300mm
F/3.5-6.3 XR Di
LD Aspherical [IF] Macro
new
The combination of SP AF11-18mm and AF18-200mm covers an amazing range of 17-300mm
*
!
* When converted to 35mm fi lm format.
11mm
Equivalent to
17mm
*
(Diagonal)
93˚3' (Horizontal)
What does the designation “Di
II
” mean?
(Di
II:
designed for exclusive use on digital SLR cameras with smaller-size imagers)
Caution :
Please read the instruction manual carefully before using the lens.
Quality Assurance Activities:
At Tamron, quality management activities are performed in
compliance with ISO9001:2000 not only to assure product quality but to enhance customer
satisfaction.
Environmental Protection:
We recognize the signifi cance of our social responsibilities. Tamron
promotes corporate activities that protect the earth's environment through the establishment of a
quality assurance system that is compliant with ISO14001.
TAMRON CO., LTD.
http://www.tamron.co. jp
17-11, 7-chome, Takinogawa, Kita-ku, Tokyo, Japan 114-0023 TEL +81-(0)3-3916-0131 FAX +81-(0)3-3916-1860
A13-EG-111-U-0504-0200
Head Office
Printed on 100%
recycled paper
Designed to capture an ideal range when used with a digital SLR camera
Designed to fi t smaller-size imagers
in order to reduce its diameter
35mm Film
Digital SLR with smaller-size imager
Images taken with
a digital SLR with a
smaller-size imager are
actually cropped to
about 70% scope.
Angle of view
75˚23'
Angle of view
52˚58'
Film
43.27mm
Same
Focal Length
28mm
image
sensor
27.9mm
Focal Length
Mirror
for Di-II lenses
Image sensor
(CCD or CMOS)
35mm Film
35mm Film
35mm Film
18mm
Equivalent to
28mm
*
75˚33' (Diagonal)
65˚36' (Horizontal)
18mm
Equivalent to
28mm*
75˚33' (Diagonal)
65˚36' (Horizontal)
50mm
Equivalent to
78mm*
31˚11' (Diagonal)
26˚7' (Horizontal)
200mm
Equivalent to
300mm*
7˚59' (Diagonal)
6˚38' (Horizontal)
AF18-200mm Di
(Model A14)
Designed for exclusive use on digital SLR cameras with smaller-size imagers.
Di-II lenses are designed exclusively for digital SLRs with smaller-size imagers. This series of lenses is not
designed for 35mm fi lm cameras and digital SLR cameras with image sensors larger than 24 x 16mm.
Categories of Tamron's Di
(Digitally Integrated design)
lens series
Super Performance
Lens
Lens
Lens
Lens
Wide-angle
Zoom
SP AF11-18mm
F/4.5-5.6 Di
LD Aspherical [IF]
(Model A13)
Equivalent to 17-28mm
Super Performance
Lens
Lens
F/3.5-6.3 XR Di
LD Aspherical [IF] Macro
(Model A14)
Equivalent to 28-300mm
High Power
Zoom
Lens
Lens
SP AF11-18mm Di
(Model A13)