Tan.Easy TAN.LITE 32000 Operation Manual - page 4
OPERATION
SETTING SPRAY PATTERN
SETTING SOLUTION AIR-FLOW CONTROL
SPRAYING SIDE TO SIDE
ACROSS THE BODY
SPRAYING UP & DOWN
THE BODY
ATTACHING AIR HOSE
REMOVING AIR HOSE
1. Un-screw the external
solution cup away from
the Handy.Tan and fill
desired amount of spray
solution. We recommend
filling it a minimum of
half way for best results.
Over filling the solution
cup may cause leaks.
2. Screw Cup back into the
Handy.Tan. Ensure it is
fully tightened so no
leaks occur.
Adjusting the spray-pattern nozzle of your Handy.Tan to suit your preferred
style of spray tanning.
To remove the air hose, turn the hose
clockwise to unlock the hose and
remove it from the Handy Tan.
Attach the air hose by inserting the
end of the air-hose into the bottom
of the handle of the handy tan.
Turning it anti-clockwise until firm
will secure the fitting inline with your
Handy Tan.
Set the nozzle fan Vertical. This
spray pattern setting is perfect
for spraying up and down, top to
bottom of the body.
The solution Flow Control dial
on the back of the applicator
will determine how much
solution will be dispensed from
the gun. You can adjust the
flow of solution by adjusting the
dial on the handle.
The higher number on your
dial, the more solution will
flow from the Handy.Tan. As
you become more comfortable
with your spray tan techniques,
you can increase the flow of
your solution.
Set the nozzle fan ‘Horizontal ’.
This spray pattern is perfect for
spraying side to side ie. left to right –
right to left across the body.
INCREASE
SOLUTION
DECREASE
SOLUTION
MAXIMUM
SOLUTION
FLOW
8
7
6
5
4
3
2
1
MINIMUM
SOLUTION
FLOW