Tanaka APM-7 Maintenance Manual - page 3
2
Before starting Maintenance Work
●
Before performing any maintenance work on the APM-7, thoroughly read this manual
and ensure that you fully understand all the instructions given herein. If you are
unclear or have questions, even if seemingly insignificant, always contact the
manufacturer or an authorized distributor.
●
Store the manual in a safe and convenient location (preferably near the equipment)
for future reference.
●
Always strictly observe the work instructions given in this manual.
●
When reading the manual, pay special attention to the sections that are indicated
with “Warning” and “Caution”. Please ensure that you fully understand the
instructions given and strictly observe these precautions at all times.
Safety Precautions (“Warning” and “Caution” indicators)
Strictly observe the instructions for safe use of the equipment at all times.
Negligent disregard of the safety precautions outlined below may not only
lead to equipment damage, but also result in serious personal injury or
death.
Tanaka Scientific Limited will not be liable for any damage or injury resulting
from user negligence.
・
Warning: Never touch the ignition coil and/or any electric components of
the equipment when performing gas leak inspection. Touching
any of the above components may cause serious burns or
electrical shock, as the unit is powered during gas leak
inspection.
・
Warning: Take extra care to avoid naked flames, sparks, etc. when
performing gas leak inspection.
Extreme danger of fire and/or explosion.
・
Warning: Never touch heating elements of the APM-7 with bare hands
when operating the device. These parts produce extreme heat
and may cause serious burns.
!
!
!