TANDBERG MOVI 4.0 - Administrator's Manual - page 10
Deploying and upgrading Movi
TANDBERG Movi Administrator guide
Page 10 of 22
•
Windows XP: %USERPROFILE%\Local Settings\Application Data\
•
Windows Vista and Windows 7: %LOCALAPPDATA% (typically
%USERPROFILE%\AppData\Local)
Mac OS X: ~\Library\Logs\Movi
Provisioning the client
Provisioning is a powerful tool for administrators to control Movi clients. Movi clients receive the Provisioning
configurations when connecting to the VCS.
Setting Provisioning configurations in TMS
Use the TMS web interface to set Provisioning configurations by going to Systems > Provisioning >
Directory. In the Configurations pane you can view, edit and add Provisioning configurations.
Uploading Movi 4.0 Provisioning option to the TMS
In TMS version 12.6 and later, the link Manage Configuration Templates is available below the
Configurations pane. To add the Movi 4.0 Provisioning options to TMS:
1. Go to Systems > Provisioning > Directory.
2. Click Manage Configuration Templates.
3. In the dialog box that opens, click the button Upload New.
4. Locate the MoviProvisioningConfigTemplate.xml file on your computer (see the
Obtaining the setup files
section).
5. Click Open, and the template will be uploaded to TMS.
Tip: You can click the ? icon on any TMS page to launch context-sensitive help. See the online TMS help
for more information on managing configuration templates.
Provisioning options
The following table details the Provisioning configurations available, including tips on how they can be used
and in which situations.
Note: Some settings are only available in TMS 12.6 or later, after uploading the
MoviProvisioningConfigTemplate.xml file. See the “Additional information” column.
The “Default” column shows how Movi behaves if no specific provisioning information is configured.
Field
Default
Description
Additional information
ClearPath
Off
ClearPath is a
TANDBERG solution that
minimizes the negative
effects of packet loss in a
non-optimal network.
Among the mechanisms
used are H.264-specific
error recovery
techniques, feedback
from decoders and
forward error correction
(FEC).
Both call participants must
support ClearPath for it to
take effect.
This setting is only available
in TMS 12.6 or later after
uploading the
MoviProvisioningConfigTempl
ate.xml file.
Default Mediatype
Candidate
Host
The address to use
before ICE has
completed, if ICE fails or
if the remote side does
not understand ICE. The
available options are:
This is typically needed when
Movi is deployed in
environments where most
other endpoints do not
understand ICE. See the
Enabling ICE
section.