TANDBERG MOVI 4.0 - Administrator's Manual - page 6
Deploying and upgrading Movi
TANDBERG Movi Administrator guide
Page 6 of 22
Deploying and upgrading Movi
This section describes the process of deploying and upgrading the Movi client, pre-configuration options, and
settings required for operation.
Note: Before provisioning, TMS and VCS must be configured appropriately. See the TMS Provisioning
Deployment Guide available on the
TANDBERG web site
for detailed information.
Obtaining the setup files
You will get a TMS ticket when a new version of Movi is available if:
Automatic check for updates is enabled. To do this:
1. Go to Administrative Tools > Configuration > Network Settings
2. UnderAutomatic Software Update, set Automatically Check for Updates to Yes.
TMS Agents are enabled. To do this:
1. Go to Administrative Tools > Configuration > General Settings
2. Set Enable TMS Agents to Yes.
The description field of the TMS ticket includes a link to a .zip archive containing the following files:
Movi.msi - enables companies to prepare their own installer (Windows only).
MoviSetup.exe - a ready-made installer (Windows only) containing the Movi.msi file.
Movi.dmg - an application bundle for Mac.
MoviProvisioningConfigTemplate.xml - used to add Movi 4.0 provisioning configurations to the TMS.
See the
Provisioning the client
section for more information.
Release notes document.
Configuring the client
This section describes and recommends configuration settings. TANDBERG recommends that you create an
installation file that will install Movi with the Advanced settings pre-configured; see the section Pre-
configuring the Movi client below.
Advanced settings
Network communication settings are available via Movi’s sign-in window.
Setting
Description
SIP Domain
Identical to the SIP domain configured on the VCS.
VCS configuration > Protocols > SIP > Domains
Internal VCS
The DNS address of the VCS Control cluster you want Movi to connect to.
Movi will always look for this address first when connecting. It is possible to
specify which port on the VCS Movi should connect to. For example
InternalVCS.example.com:5063
External VCS
The DNS address of the VCS Expressway cluster you want Movi to connect
to. If Movi fails to connect to the Internal VCS, it will try this VCS address. It
is possible to specify which port on the VCS Movi should connect to. For
example ExternalVCS.example.com:5063
Using DNS
Movi can use IP or DNS addresses to locate VCS.
Using DNS addresses offers advantages such as: