TANDBERG RX8310 User Manual - page 15
RX8310/RX8315/RX8330 Distribution Receiver
15
•
Status: This page contains User Settings for:
Unit name and IP address
Input feed status
Video decode status
Audio decode status
Decryption status
Unit alarm status and log
•
Device Info: This page contains User Settings for:
IP Control Ports Set-up
Unit and module build version details
Fan and unit temperature status
SNMP trap table
Unit reset
•
Alarms: This page contains User Settings for:
Alarm filtering
Alarm priority configuration
Alarm mapping to output relays
•
Customisation: This page contains User Settings for:
Enabled license details
•
Input: This page contains User Settings for:
Input feed lock status and bit-rate
Primary and secondary feed selection
Input tuning parameters
Input signal and quality levels
•
Service (Program): This page contains User Settings for:
The currently selected service for decode from the incoming feed
The currently selected PCR component from the incoming feed
The currently selected video component from the incoming feed
The currently selected audio components from the incoming feed
The currently selected splice signal components from the incoming feed
The currently selected subtitle and teletext components from the
incoming feed
The currently selected services for decryption from the incoming feed
Service selection behaviour control
Video decode aspect ratio conversion control
Video test pattern selection
Audio output control
VBI data output control