TANDBERG Scholar MXP Assembly, Setup & User Manual - page 30
MULTISITE
The optional MultiSite capability enables several sites to participate in the same conference. You can have a maximum of
5 video- and 3 telephone-participants including yourself (the host). The participants are tiled up on the screen and are on
display simultaneously in a Split Screen. During an MCU conference, the status line will provide information about the
conference.
A MultiSite conference can be established in different ways. The MultiSite Services vary depending on how you make the
call. Refer to the TANDBERG 6000 MXP User Manual for more about MultiSite and MCU Services.
1. While in a call, press ADD SITE and select a directory entry or enter a number manually.
2. Press CONNECT.
Repeat steps 1 and 2 if you would like to connect additional sites. You can add a site at any time by entering the CALL
CONTROL page.
3. Operate the conference as normal.
DISCONNECTING A CALL
Pressing the red DISCONNECT button during a call will prompt you to confirm the termination of that call before the
connection is terminated.
When in a MultiSite call, pressing the DISCONNECT button will allow you to choose to disconnect individual sites, or to
disconnect the entire MultiSite session.
Page 30 of 32
TANDBERG SCHOLAR ASSEMBLY, SETUP AND USER GUIDE | D50564.01