1. DL manuals
  2. TANDBERG
  3. Receiver
  4. TT1280
  5. User Manual

TANDBERG TT1280 User Manual

Other manuals for TT1280: Reference Manual

Summary of TT1280

  • Page 1

    St.Us.E10141.4 www.Tandbergtv.Com english (uk) user guide tt1280 and tt1282 hd professional receiver/decoder software version 2.0.0 (and later).

  • Page 2

    Tt128x high definition professional receiver/decoder 2 trademarks dolby ® / dolby ® digital / ac-3 ® are registered trademarks of dolby laboratories licensing corporation. Customer services europe, middle east tel: +44 (0) 23 8048 4455 and africa: fax: +44 (0) 23 8048 4467 support@tandbergtv.Com ame...

  • Page 3

    Tt128x high definition professional receiver/decoder 3 contents 1 who should use this user guide? ................................................. 5 1.1 what equipment is covered by this user guide? .................................. 5 1.2 hardware and software options ................................

  • Page 4

    Tt128x high definition professional receiver/decoder 4 list of tables table 1.1: equipment model descriptions.................................................... 5 table 1.2: hardware options .................................................................... 6 table 1.3: software options ............

  • Page 5

    Tt128x high definition professional receiver/decoder 5 1 who should use this user guide? This user guide is written for operators/users of the tt1280 and tt1282 integrated receiver/decoder (ird) to assist in installation and operation. The tt1280 and tt1282 are referred to throughout this user guide...

  • Page 6

    Tt128x high definition professional receiver/decoder 6 model number marketing code description tt1282 common interface tt1282/cibas mpeg-2 hd decoder with integrated common interface cam reader, ac mains voltage input. Mpeg 4:2:0 and 4:2:2 video decode. Tt1282 director (-48 v version) tt1282/dirbas/...

  • Page 7

    Tt128x high definition professional receiver/decoder 7 2 installing the equipment 2.1 introduction for best performance and reliability follow the instructions for site requirements and installation in the reference guide and only use installation accessories recommended by the manufacturers. 2.2 op...

  • Page 8

    Tt128x high definition professional receiver/decoder 8 2.4 connecting up the basic receiver always use the specified cables supplied for signal integrity and compliance with emc requirements (see the reference guide). Only those connectors used are labelled in figure 2.1 and described in table 2.1. ...

  • Page 9

    Tt128x high definition professional receiver/decoder 9 type of connector description asi/hdsdi out 1 a 75 w bnc connector provides either an mpeg transport stream output interface or serial digital video output. Asi or hdsdi output format is selectable via the front panel. Asi/hdsdi out 2 a 75 w bnc...

  • Page 10

    Tt128x high definition professional receiver/decoder 10 connect the receiver to the power supply as follows: > power supply ensure the power supply is isolated and switched off. > receiver ensure the correct fuse type and rating has been fitted to both the equipment and the power cable. > supply cor...

  • Page 11

    Tt128x high definition professional receiver/decoder 11 3 operating the equipment from the front panel 3.1 introduction the front panel display and keypad may be used to configure, control and monitor the receiver when an external control system is not used. 3.2 local control at power-on the receive...

  • Page 12

    Tt128x high definition professional receiver/decoder 12 3.4 navigating the menus operating the ird from the front panel is via two operating modes: navigate modeand edit mode. 3.4.1 navigate mode navigate mode allows the user to move between menus and pages within menus (editing the left display are...

  • Page 13

    Tt128x high definition professional receiver/decoder 13 table 3.2: edit mode action result up pushbutton pressed increases value of current edit parameter by one unit. Down pushbutton pressed decreases value of current edit parameter by one unit. Left pushbutton pressed moves cursor one edit paramet...

  • Page 14

    Tt128x high definition professional receiver/decoder 14 table 3.3: selecting a menu option step action result 1 select the menu and display the required selection. Normally there is only one selectable item. If there is more than one, use the right and left pushbuttons as described in table 3.4. 2 p...

  • Page 15

    Tt128x high definition professional receiver/decoder 15 4 menu structure section c.9 section c.6 section c.4 section c.5 4. Conditional access menu 5. Ts output menu 5.1 connector 1/2 7. System menu 2. Input menu (qpsk, g.703 or ip or hom) 1. Presets menu tt1280 initialising switch on boot screen 1 ...

  • Page 16

    Tt128x high definition professional receiver/decoder 16 5 operating the equipment remotely 5.1 introduction when an external control system is used the receiver may be configured, controlled and monitored remotely. 5.2 remote ethernet (snmp) operation if the receiver is to be controlled via its ethe...

  • Page 17

    Tt128x high definition professional receiver/decoder 17 hom/qpsk input > select the rf input connector (menu 2.3) > set the lnb frequency (menu 2.3.2) > satellite frequency (menu 2.3.2.1) > symbol rate (menu 2.3.2.2) > modulation fec (menu 2.3.2.3) > lnb power (menu 2.3.2.4) > lnb 22 khz (menu 2.3.2...

  • Page 18

    Tt128x high definition professional receiver/decoder 18 6.5 select a service navigate to the service selection menu (menu 3). For single service transport streams the service should be selected and displayed along with the service id. For fully compliant dvb or atsc transport streams the service nam...