Tangent VITA 2050 Service Manual - Getting Started
GETTING STARTED
IMPORTANT
All information is subject to change without prior notice.
How to Use this Service Manual
This Service Manual provides in‐depth illustration of disassembling the system. Topics may be related to
each other; hence it is highly recommended to read this guide from cover to cover first. After that, you may
go directly to any specific topic that most meets your immediate needs.
A Phillips (crosshead) screwdriver and a flathead
screwdriver can be used to do most of the installation.
Choosing one with a magnetic head would be
better.
Pliers can be used as an auxiliary tool to connect
some connectors or cables.
Forceps can be used to pick up tiny screws or set
up the jumpers.
Rubber gloves can prevent from being incised
and from shock of any static charge.