Tannoy CVS4 User Manual - Cvs4
CVS4
CVS4 data file // issue 1.09 // 18.01.10
Tannoy United Kingdom
T: 00 44 (0) 1236 420199
E: enquiries@tannoy.com
Tannoy Deutschland
T: 00 49 (180) 1111 881
E: anfragen@tannoy.com
Tannoy France
T: 00 33 (0) 1 7036 7473
E: ventes@tannoy.com
TC|Group Americas
T: 00 1 (519) 745 1158
E: info@tcgroup-americas.com
TECHNICAL SPECIFICATIONS
Frequency Response (-3dB)
(1)
85Hz - 19kHz
Frequency Range (-10dB)
(1)
77Hz - 22kHz
System Sensitivity (1W @1m)
(2)
87dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle
90 Degrees Conical
Coverage Angle (1kHz to 6kHz) 102 Degrees Conical
Directivity Factor (Q)
5.6 averaged 1kHz to 6kHz
Directivity Index (DI)
7.1 averaged 1kHz to 6kHz
Rated Maximum SPL
103dB (average)
109dB (peak)
Power Handling
Average
40W
Programme
80W
Peak
160W
Recommended Amplifier Power 80W @ 6 Ohms
Nominal Impedance
6 Ohms
Transformer Taps
(via front rotary switch)
70V
30W / 15W / 7.5W / 3.75 / OFF
& Low Impedance operation
100V
30W / 15W / 7.5W / OFF
& Low Impedance operation
Distortion
10% Full Power
2nd Harmonic
3rd Harmonic
250Hz
0.231%
0.112%
1kHz
0.229%
0.253%
10kHz
0.163%
0.025%
1% Full Power
2nd Harmonic
3rd Harmonic
250Hz
0.99%
0.169%
1kHz
0.816%
0.027%
10kHz
0.444%
0.07%
Crossover
2.7kHz
Notes
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, and Ease™ Data can be
downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Low Frequency
100mm (4.00") mineral loaded cone
High Frequency
19mm (0.75") soft dome
Physical
System Type
Ceiling speaker with integral
(blind mount) Back can
Enclosure
Backcan
Zinc plated steel
Baffle
Reflex loaded UL 94V-0 rated ABS
Grille
Steel, with weather resistant coating
Safety Features
Safety ring located at rear of enclosure
for load bearing safety bond
Clamping Design
Security Toggle Clamp
Min / Max Clamping Range
9.00mm (0.35") / 34.00mm (1.34")
Recommended Clamp Torque
1.5Nm
Cable Entry Options
Cable clamp & squeeze connector for
conduit up to 22mm
Connectors
Removable locking connector with screw
terminals with "loop through" facility
Safety Agency Rating
UL-1480, UL-2043, CE
CVS4 Hole Cutout Diameter
180mm (7.09")
Dimentions
Bezel Diameter
213mm (8.39")
Front of Ceiling to
Rear of Backcan
202.5mm (7.97")
Front of Ceiling to
top of safety loop
214.9mm (8.46")
Net Weight (ea)
3.8kg (8.38 lbs)
Included Accessories
C Ring, tile bridge, paint mask,
cutout template, grille
Optional Accessories
Plaster (Mud) Ring
System
CVS4
Transducers
PART NUMBER
MODEL NAME
COLOUR
PACKED QTY
PACKED WEIGHT
8001 4230
CVS4
WHITE / PAINTABLE
2
9.6kg (21.16 lbs)
8001 4180
CVS4 Plaster (Mud) Ring
ZINC PLATED STEEL
10
6.25kg (13.78 lbs)
Ordering Information
CVS 4.qxp:Layout 1 21/1/10 10:22 Page 2