Tannoy Definition Owner's Manual - page 9
08_ DEFINITION SUBWOOFER OWNER’S MANUAL
DEFINITION SUBWOOFER OWNER’S MANUAL _09
TECHNICAL SPECIFICATIONS
DEFINTION SUBWOOFER
Output power
1000 W RMS
Low frequency response (-6 dB)
19 Hz
(Typical in room)
Inputs
2 x Phono line level, 2 x XLR balanced
Input sensitivity (full power)
0.3 / 0.6 V (switchable) @ 100 Hz
Input impedance
22 k ohm
High-pass outputs
2 x Phono line level, 2 x XLR balanced, 31- 125 Hz, 2nd or 4th order high-pass
Input filter
31- 125 Hz, 2nd or 4th order-low pass, with LFE provision
Auto mute
After delay or permanently on (switchable)
Driver type
2 x 300 mm (12”) High Excursion, Aluminium cone, side firing
50 mm (2”) voice coil, field stabilised Ferrite Motor System
Enclosure type
Closed box
Volume
94 Litre (3.32 cu. ft.)
Dimensions, (H x W x D)
514 mm (20.24”) x 562 mm (22.13”) x 493 mm (19.41”)
Including feet, grilles & terminals
Weight
38.5 kg (84.9 lbs)
Mains voltage
230 V or 115 V (nominal), factory set, 50 - 60 Hz
Standby power consumption
Additional features
3 x User defined presets
Variable phase control, 0- 180 degrees
Parametric Equaliser x 2, -12/ +3 dB Range, 31-125 Hz, Q= 2- 14.4