Tansun ALG 513 UK Reference Manual
The use of this symbol indicates that this product may not be treated as household waste. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local council, your household waste disposal service
or the shop where you purchased the product.
©Tansun Limited 2013 Part No. 043112 Issue. Aa
F o l l o w i n g i n f o r m a t i o n i s o n l y f o r E U - m e m b e r s t a t e s :
13. Refit the new lamp in reverse order ensuring that no wires get trapped and all screws are fully tightened.
12. The heater should now be broken down as shown in Fig. 12. Note: One of the lamp wires is longer than the other. Ensure your
new lamp wires are the same length and it’s fitted the same way around as the original.
Fig. 12
Fig. 11b
11. The lamp is held in at each end by spring clips that hold the lamps ceramic caps in the lamp holders. Pull the clips back (Fig. 11a)
far enough to allow the ceramic caps to be lifted up (Fig. 11b) at both ends and remove the lamp from the heater.
Fig. 11a
Spectrum House, Unit 1, Ridgacre Road, West Bromwich,
West Midlands, B71 1BW, England.
Tel: +44 (0)121 580 6200 - Fax: +44 (0)121 580 6222
Email: quartzinfo@tansun.com - Website: www.tansun.com
Reference Manual
Algarve
MODELS FOR UK & EUROPE:
ALG 513 UK
ALG 513 EU
Aqua Design GmbH
Abt. Tansun Heiz Systeme
Leopoldstraße 244
80807 München
Tel.: 08251/871896
Fax: 08251/827126
E-Mail: info@Tansun-Heizer.de
Intermet: www.Tansun-Heizer.de