Tansun SH2-1200W UK Reference Manual - page 3
Fig. B
DRILLING HOLE TEMPLATE DIMENSIONS FOR
WALL MOUNTED BRACKETS - DOUBLE HEATER
Fig. C
Fig. D
DRILLING HOLE TEMPLATE DIMENSIONS FOR
WALL MOUNTED BRACKETS - TRIPLE HEATER
DRILLING HOLE TEMPLATE DIMENSIONS FOR
WALL MOUNTED BRACKETS - QUADRUPLE HEATER
1. Securely fasten the Eclipse brackets to the mounting surface using the fixing holes
in the brackets. See Fig.s B, C and D for mounting hole centres of the brackets.
Please refer to Table 1 for recommended positioning of the heater.
2. Fix in the required angular position by tightening the fixing bolts on the brackets at
the rear of the heater.
3. Arrange the mains supply cord so it cannot be tripped over or damaged and ensure
it is not resting on the heater body or mounting brackets. Also ensure it is away from
the front of the heater.
Always isolate the heater from the mains supply when adjusting the angular
position.
6
•
Do not use an extension cord with this product because the extension
cord may overheat and cause a risk of fire.
•
Keep the mains supply cord away from the body of the heater which will
get hot during use.
•
Arrange the mains supply cord so it cannot be tripped over or damaged.
•
Do not cover or obstruct the heater while it is in use.
•
Do not insert any object through any slot or opening in the heater.
•
Do not use if a guard is not present.
•
Do not install less than the minimum mounting distance from the floor.
•
WARNING: This heater is not equipped with a device to control the
room temperature. Do not use this heater in small rooms when they are
occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
•
Do not use the heater in a bathroom.
•
WARNING: This appliance must be connected to a supply that is
earthed!
I M P O R TA N T -
S AV E T H E S E I N S T R U C T I O N S F O R F U T U R E R E F E R E N C E
R is k o f F ir e
Keep combustible materials such as furniture, papers, clothes and curtains
at least 1.8m (6 feet) from the front of the heater and away from the sides
and rear. If the heater is to be used outside, we recommend that a
waterproof or indoor socket outlet is used.
3