Tapco S1001N-1 Operating Instructions

OPERATIONS MANUAL

Operating Instructions for the Dräco  

Metal-Shear SD5-1 and S1001N-1

To avoid any disturbance, please read the following instructions:

F O R   YO U R   S A F E T Y:

Valid 10/2002

1

2

3

5

4

1 

 Safe operation of this machine is only possible when the 

operating instructions and the safety precautions are 

read completely and the instructions contained therein 

are strictly observed.

2 

 The machine must not be used or operated in a damp or a 

wet environment.

3 

 Always inspect the cable and plug before using machine. 

Damage must only repaired by a qualified professional. The 

plug should only be placed into the main socket when the 

machine is in the off position.

4+5   Always wear protective goggles, protective gloves and 

heavy-duty shoes when working.

For further notes on safety please refer to the red safety leaflet 

enclosed in the tool box.

l  Do not carry the machine by the cable.

l   Always remove the plug from the power supply socket 

before carrying out any work on the machine, during work 

interruptions or when not using the machine.  

l  Always place the cable to the rear, away from the machine.

l  Apply the machine to the sheet metal only, when switched on.

l  Always provide for secure footing when working.

l   Firmly clamp the work piece if it does not remain stationary 

from its own weight.

l   The knife should not rub on the jaws as there is a possible 

danger of breaking the cutting tool.

l   Do not exceed the maximum allowable material thickness, 

especially when cutting over double folded joints or welded 

seams.

F

DRÄCO metal shears

SD5-1

S1001N-1

max. cutting capacity

steel

400 N/mm² mm/ga.

1.0 / 19

1.3 / 18

stainless steel

600 N/mm² mm/ga.

0.7 / 21

1.0 / 19

stainless steel

800 N/mm² mm/ga.

0.4 / 24

0.7 / 21

aluminium

250 N/mm² mm/ga.

1.5 / 16

2.0 / 14

tightest radius

mm/ga.

50

100

working speed

± m/min 5-9

5-9

strokes

min 

-1

3900

3900

motor capacity

Watt

300

300

weight

kg

1.6

1.6

all units are ready to use

SD5-1

S1001N-1

spare parts

spare parts

knife

01011 knife

01001

set of jaws

BG13574/1 set of jaws

BG10600

knife-pin set  BG12555

optional accessories

metal-box

18000

adjustable guide     S/01    up to 100mm

10059

adjustable guide     S/01    up to 250mm

10060

adjustable guide     S/01    up to 500mm

10061

support roller

BG10076

BG=Set                                                                                other voltages available