Tappan TM5430B Owner's Manual - page 11
SETTING COOKING TIMES AND
POWER LEVELS
A. One-stage
Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds. If you are setting a time greater
than one minute, you must enter
numbers for both minutes and seconds.
For example, to set 20 minutes, enter
2,0,0,0.
2. If you want to set a power level other
than 100% power, touch POWER, then
use the number pads to enter the power
level. You can set the power level
from 1 to 9.
3. Touch START to start cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
B. Two-stage Cooking
Some recipes require different stages of
cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in “One-stage
Cooking”.
DO NOT TOUCH START PAD.
2. SET STAGE 2:
Touch MEMORY pad then enter proper
cooking time and (lower) power level.
(Most 2-stage recipes use lower power
for second stage.)
3. Touch START pad.
NOTE:
The respective lights will come onto indicate which
stage the oven is operating in. After total time has
elapsed, 3 beeps sound. After a cooking or
defrosting program has completed, the oven will
automatically continue to sound three beeps every
two minutes until the door is opened or the
CLEAR pad is touched.
PRE-SET
Suppose you want to set the oven to start-up at 2:00
o’clock.
Step 1: 1. Touch PRE-SET pad.
2. Touch numeral pads 2.0.0.
3. Set the cooking programs.
4.
Touch
START
pad.
NOTE:
Be sure the time of day clock is set at the correct
time before programming PRE-SET.
EXPRESS
Use this feature to program the oven for 4 popular
microwave timings.
With each touch of the EXPRESS pad you can
program the oven for:
15 seconds……..TOUCH ONCE
30
seconds……..TOUCH
TWICE
1 minute………..TOUCH 3 TIMES
2 minutes………..TOUCH 4 TIMES
The oven will operate at HIGH power (100% power
output) for EXPRESS cooking program
.
Suppose you want to set the oven to cook for 1
minute at 100% by suing this feature:
Step: 1. Touch the EXPRESS pad 3 times then
“1:00” will appear in the display.
2: Touch START pad.
SETTING “JET DEFROST”
1. Touch JET DEF pad.
10