Target Audio TSU Owner's Manual - page 4
INSTALLAZIONE
Prima di installare il subwoofer, assicuratevi che
non interferisca con la sicurezza di guida.
Controllate la superficie di posizionamento per prevenire danni
al serbatoio, ai cavi elettrici o alle condutture idrauliche. Fissa-
te con cura il subwoofer ad una superficie solida, in un luogo
protetto da polvere, umidità ed oggetti in movimento.
COLLEGAMENTI
Prima di effettuare i collegamenti, spegnete l'autoradio, l'am-
plificatore e tutti gli apparati elettronici del sistema audio, per
evitare possibili danni.
Collegate il subwoofer all'amplificatore utilizzando cavo di
buona qualità. Fate scorrere i fili attraverso una guaina di pro-
tezione; non passate vicino a centraline elettroniche, ai cablag-
gi dell'autovettura o a parti che generano calore.
La sezione del cavo deve essere adeguata alla potenza applica-
ta ed alla lunghezza del cavo stesso, come da tabella:
INSTALLATION
Before the installation, check that the subwoofer
never interferes with your total driving safety.
Check the mounting location carefully, to avoid damages to the
gas tank, electrical wires or hydraulic pipes. Fix the subwoofer
carefully on a steady surface, away from dust, moisture and
moving objects.
WIRINGS
Before starting connections, turn off car radio, amplifier and
all electrical devices in your audio system, in order to avoid
possible damages.
Link the subwoofer to the amplifier by using high quality ca-
ble. Route all wires through a protection grummet; don't put
cable close to electronic devices, car wiring or heat-generating
parts
The wire gauge has to be adapted to the used power and to the
cable length, as on underneath table:
Length
0÷2 meters
> 2 meters
150 watt rms
14 AWG / 2.2 mm
2
14 AWG / 2.2 mm
2
300 watt rms
14 AWG / 2.2 mm
2
12 AWG / 3.3 mm
2
450 watt rms
12 AWG / 3.3 mm
2
10 AWG / 5.3 mm
2
800 watt rms
10 AWG / 5.3 mm
2
8 AWG / 8.4 mm
2