Target F500 Quick Start Manual - 0.558
8
9
0.558
µSv/h
22
% N Probability
Dose Rate
11:40
Finder
Identify
Menu
Starting the F500
After making sure that the F500
is loaded with a power module
with sufficient capacity, you can
start the F500 by pressing the
power button.
The Power On Indicator above
the screen flashes and the F500
initializes.
While displaying the software
name
the F500
loads it’s software and does
some startup quality checks.
This may take up to 30 seconds.
The moment the dose rate
screen appears the F500 is
ready for operation.
The F500 is usually operated
with the hardware buttons
and the onboard user-
interface, but it can also be op-
erated via the web-interface.
Apart from being able to re-
motely operate the F500 with
the web-interface, it is the main
tool to set up and administer the
instrument. The web-interface
is where you will find a lot of in-
formation about the device and
also the onboard user manual.
To view the web-interface and
the user manual therein you
have to first connect a computer
to the F500.