Tascam AV-452 Installation & Support Manual - 1 – Introduction
1 – Introduction
6
TASCAM AV-452
Installation & Support Guide
How the manual is organized
The different sections of the manual are as follows:
1, “Introduction” (page 5)
This introduction
to the AV-452.
2, “General installation notes” (page 7)
As the title suggests, this includes general notes on
the physical and electrical installation requirements
for the AV-452.
3, “Front panel features” (page 8)
As well
as a list of the front panel controls and features, this
section provides details on the operation of the AV-
452. Read this section to obtain an overview of the
way in which the AV-452 works.
4, “Remote control unit features” (page
10)
This provides a list of the features and functions
available using the RC-452 remote control unit, as
well as details on how to program the RC-452 to
learn and replay the command codes of other units.
5, “Rear panel connections” (page 12)
This lists the connections to and from the AV-452.
6, “Customization and settings” (page
16)
The AV-452 can be customized for the individ-
ual installations in a number of ways, using the rear
panel switches, etc. This section describes the way in
which this customization can be carried out, includ-
ing the way in which the AV-452 can learn the IR
codes necessary to control external devices.
7, “External control” (page 18)
The AV-452
can be controlled by an external serial controller, and
this section lists the control codes available for con-
trol, status, and query. Additionally, relay control and
tally indicator connectors are provided. Details of
these are given in this section.
8, “Specifications and block diagram”
(page 20)
Performance figures, dimensional draw-
ings and a block diagram of the AV-452.