Tascam HD-R1 Release Note - Maintenance Items
2
TASCAM HD-R1
V1.01 additions
HD-P2 Compact Flash media can now be used for
•
playback. “H” appears on the LCD screen when such
media is in use.
If a track that does not exist is selected using direct
•
play (from an RC-SS20), the unit stops.
Maintenance items
When transmitting multiple tracks using FTP over LAN
with a “Static” address, the set IP address would be
changed automatically. This problem has been fixed.
The internal clock would become significantly
inaccurate. This problem has been fixed.
The meter peak hold function did not work properly
sometimes. This problem has been fixed.
The following problems related to serial control have
been fixed.
The wrong track number would be returned during
•
recording.
The Playlist Name command did not function.
•
During MP3 recording, the amount of recording space
displayed would be significantly inaccurate sometimes.
This problem has been fixed.
If
“Auto Cue” was set to “–24dBFS” and the “Ducking”
Threshold value was set to “–18dBFS”or “–12dBFS”
noise sometimes occurred when ducking began. This
problem has been fixed.
“Auto Cue”
would function incorrectly with tracks
of no more than one second. This problem has been
fixed.
The name of the file being recorded is now shown
even during ready-to-record state.
If you tried to start the HD-R1 while sending a serial
command, the unit would freeze. This problem has
been fixed.
During startup, the internal clock would be several
seconds late. This problem has been fixed.
Even if the remaining recording time exceeded
99:59:59.99, the minutes and smaller units would still
change. This problem has been fixed.
V1.10 changes
When track names are updated on a Compact Flash
•
card, the list of the track names on the card is sorted
again.
An error that occurred in moving the minutes when
•
setting the time with the shuttle wheel has been fixed.
A message now appears when the number of tracks in
•
a folder reaches 1023.
An error that occurred in which the remaining time of
•
the track was mistakenly shown based on the sampling
rate of the previous track after using the
SKIP
key
or otherwise switching to a track with a different
sampling rate has been fixed.
A problem in which S/PDIF signals could not be
•
received after “
Media full
” messages has been
fixed.
A problem in which Network settings were not
•
changed even when the
ENTER
key had been pushed
has been fixed.
A problem in which tracks uploaded by FTP would play
•
early or late
has been fixed.
The problem in which the Playlist menu Delay Interval
•
option did not function has been fixed.
The timeout time using serial control has been
•
eliminated. Telnet Control has a 900-second timeout.
A problem in which the unit would stop when
•
transferring 50 megabytes of data or more by FTP has
been fixed.
A problem in which the beginning of the track’s sound
•
would be played back after single mode playback has
been fixed.
A problem in which the R output did not change even
•
when the reference level (“Ref Level”) was changed has
been fixed.
When in a PLAY READY state, the sampling rate of the
•
unit now changes to that of the current track.
It is now possible to press the
•
CURRENT
+
SKIP
keys
as a shortcut to move to the top directory.
The FTP Transmission speed has been accelerated.
•
By accelerating recording processing, the writing time
•
that had been required when turning prerecording ON
during Sync recording has been reduced.
Windows Media Player WAV Files can now be played
•
back.
V1.01 changes