Tascam SS250 User Manual - Tascam Ss250 Control
TASCAM SS250 CONTROL
TASCAM SS250 CONTROL
11
Settings Window
Press the Settings button on the Home Screen when stopped,
playing back or in playback standby to open the Settings Win-
dow.
Press the Settings button again or tap outside the Settings Win-
dow to close it.
1
FLASH LOAD button
Press this button to make the unit flash load.
2
A-B Repeat ON button
Use this button to set the A-B repeat function of the unit.
Press this button when “Set A” appears on it and the unit is
playing back or in playback standby to set the repeat play-
back interval start point (A).
This will change the button to “Set B”.
Press this button again at the position where you want to set
the repeat playback end point (B) and start A-B repeat play-
back.
This will change the button to “A-B Repeat ON”.
Press this button again to clear the set A-B interval and turn
A-B repeat playback off.
3
PITCH ON button
Press this button to turn the pitch control function on/off.
4
PITCH − button
Press this button to change the pitch in 0.1% increments.
5
PITCH + button
Press this button to change the pitch in 0.1% increments.
6
PITCH slider
This changes the pitch in 0.1% increments.
7
KEY ON button
Press this button to turn the key control function on/off.
8
KEY − button
Press this button to change the key.
9
KEY + button
Press this button to change the key.
0
KEY slider
Use this to change the key.
TIME SEARCH window
Press the
TIME SEARCH
button on the Home Screen to open the
TIME SEARCH
window.
Use this screen to move to set points when stopped, playing
back or in playback standby.
1
OK button
Press this button to move to the set point.
2
TRACK number
Input the number of the track in which you want to move to
a point.
3
Time from track beginning
Enter the time from the track beginning that you want to
move to in hours, minutes, seconds and 10msec increments,
using two digits for each.