Tascam US-428 Supplementary Manual - page 2
Control Surface Mapping:
TIP
: If you click on the characters “B4” at the upper right of the B4 program, you can rapidly
switch between Keyboard and Control views.
Keyboard View: Here you can access the drawbars, rockers, expression pedal, and Leslie
speed. There are three banks, accessible with the BANK L and BANK R buttons on the US-428.
o
Bank 1:
§ Faders 1-8 + master =
DRAWBARS 1-9 ON THE UPPER MANUAL
§ Mute 1
=
VIB LOW ON/OFF
§ Mute 2
=
VIB UP ON/OFF
§ Mute 3
=
ROTATOR SPEED FAST/SLOW
§ Mute 4
=
PERC ON/OFF
§ Mute 5
=
DRIVE ON/OFF
§ Mute 6
=
ROTATOR ON/OFF
§ Mute 7
=
VELOCITY ON/OFF
§ Data Wheel
=
EXPRESSION PEDAL
o
Bank 2: (Similar to Bank 1 except):
§ Faders 1-8 + master =
DRAWBARS 1-9 ON THE LOWER MANUAL
o
Bank 3: (Similar to Bank 1 except):
§
Faders 1-6
=
DRAWBARS 1-6 ON THE PEDAL MANUAL
Control View: All the previous controls operate as before, and the EQ switches and controls
also allow these settings:
With EQ High activated:
§ GAIN
=
TREBLE SLOW
§ FREQ
=
TREBLE FAST
§ Q
=
TREBLE ACCEL
§ PAN
=
TREBLE TONE
With EQ Hi Mid activated:
§ GAIN
=
TUBE AMP DRIVE
§ FREQ
=
TUBE AMP VOL
§ Q
=
TUBE AMP BODY
§ PAN
=
TUBE AMP BRIGHT
With EQ Lo Mid activated:
§ GAIN
=
MIC BALANCE
§ FREQ
=
MIC PAN
§ Q
=
MIC SPREAD
§ PAN
=
MIC DISTANCE
With EQ Low activated:
§ GAIN
=
BASS SLOW
§ FREQ
=
BASS FAST
§ Q
=
BASS ACCEL
§ PAN
=
BASS TONE
With Aux 1 activated:
§ GAIN
=
PERC VOLUME
§ FREQ
=
PERC DELAY
§ Q
=
PERC HARMONIC
§ PAN
=
KEYCLICK AMT
With Aux 2 activated:
§ GAIN
=
VIBRATO MIX
§ FREQ
=
VIBRATO DEPTH
§ Q
=
PERC HARMONIC
§ PAN
=
KEYCLICK AMT