Taser AXON body User Manual - Caution
6
Chapter 2
Getting to Know Your AXON body Camera
5
Speaker – Provides audio notifications.
6
EVENT Button – Used to start and stop recording. (Double-press to start; hold for 3 seconds to stop
recording.)
The camera might take several additional seconds to close out of the video when it is taken out of EVENT
mode.
7
Battery Button – When pressed, the battery button lights up the Battery LED, which momentarily indicates
the remaining battery capacity.
8
Battery LED – When lit, momentarily indicates the remaining battery capacity (it does not indicate the
operating mode).
Battery Status
Battery LED
Battery Capacity is 41–100 Percent.
Green
Battery Capacity is 20–40 Percent.
Yellow
Battery Capacity is Less Than 20 Percent.
Red
When you turn the camera on, all LED lights turn solid red until the system is ready to use. Then the
Operation LED blinks green (BUFFERING mode) and the Battery LED goes out.
9
Microphone – For audio recording.
10
Pairing/Volume Button – When pressed, adjusts the volume of audio prompts. It also is used to pair the
AXON body camera with a smart mobile device (e.g., phone or tablet).
11
Upload Status LED – Indicates status when the camera is downloading data to your computer or uploading
data to EVIDENCE.com. This LED also indicates status when you are configuring your AXON body camera to
work with a mobile device such as a smart phone.
12
Imager – The camera lens.
Pressing buttons causes the AXON body camera to emit audio alerts (beeps) to indicate system actions. See
Chapter 12: Audio Prompts for more information.
Accessories
The AXON body camera is designed to be worn in a holster that can be clipped to your shirt. The holster
incorporates a plug that goes into the camera’s ETM connection socket when the camera is holstered. The plug
is intended to filter excessive ambient noise and prevent dust debris from entering the socket.
Additional holster options are available. Visit www.TASER.com for more information.
CAUTION
Keep the plug inserted into the ETM connection socket. If the plug is not plugged into the socket, audio
recording will be distorted.