1. DL manuals
  2. Task Force
  3. Power Tool
  4. 24053
  5. Operator's Manual

Task Force 24053 Operator's Manual

Manual is about: 7.2V

Summary of 24053

  • Page 1

    Item / article / articulo # 248906 model / modele / modelo #24053 read your operator’s manual completely and carefully before attempting to set up or operate your new power tool. All operators of this equipment should read and understand all safety rules printed on the machine and in this operator’s...

  • Page 2

    Table of contents ………………………………………………………………………………….…………..…………………3 ………………………………………………………………………….…………..…………………2 2 product specifications product specifications safety information ………………………………………………………………………………….…………..…………………7 package contents …………………………………………………………….…………..…………………8 know your 7.2v cordle...

  • Page 3: Safety Tool Symbols

    Safety information please read and understand this entire manual before attempting to assemble, operate or install the product. These safety instructions are not meant to cover every possible condition that could occur. If you have any questions regarding the product please call customer service at ...

  • Page 4

    Safety information 4 read and understand all instructions. Failureto follow all instructions listed below may result inelectric shock, fire and/or serious personal injury. Work area • keep your work area clean and well lit. • do not operate power tools in explosive atmospheres, such as in the presen...

  • Page 5

    Safety information 5 for allgarden tools •avoid dangerous environment. Don’t use tool in damp or wet locations. •don’t use in rain. •keep by standers and children away while operating. •dress properly. Do not wear loose clothing or jewellery.They can be caught in moving parts. Use of rubber gloves a...

  • Page 6

    Safety information 6 warning fig. B minimum gauge for extension cords (awg) (when using 120 v only) ampere rating total length of cord in feet (meters) more than not more than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m) 0 6 18 16 16 14 6 10 18 16 14 12 10 12 16 16 14 12 12 16 14 12 not recomm...

  • Page 7

    Package contents 7 by purchasing a battery-powered tool you have helped reduce the pollution level of our environment. Please check the contents of the carton below. Examineall the parts before using the cordless shear and battery charger. To reduce the risk of fire, electric shock, and personal inj...

  • Page 8

    Know your 7.2v cordless shear 8 battery charger cutting blade trigger switch pole plug connector handle lock-off button operating instructions install the blade sheath (fig. 1): 1. Align the blade sheath (2) with the cutting blades (1) on the shear. 2. Slide the blade sheath (2) over the blades, the...

  • Page 9

    Install wheels extension handle 9 1. Thread wheels and the shaft (1) in to grass shear body. 2. Screw with another wheel (2). 1 2 press 1. Install the handle. 2. Press the lock button (2) and push the handle firmly into the shear (1). 3. Install the extension handle power connection (3). 1 3 2 opera...

  • Page 10

    9 the battery charger the shear is not shipped fully charged. The shear requires charging before using the for the first time. The charger requires no adjustment or settings. 1. Plug the charger into an ac power outlet. 2. Insert the charger plug into the shear, makingsure the plug is fully seated i...

  • Page 11

    11 environmentally safe battery disposal the following toxic and corrosive materials are in the batteries used in this battery pack: cadmium, a toxic material. All toxic materials must be disposed of in a specified manner to prevent contamination of the environment. Before disposing of damaged or wo...

  • Page 12

    Item name blade cover pin blade cover nut wheel right shell nut spring button switch spring pole pin shell tie-in pole groupware right handle handle button spring handle button spring trigger switch louck off button trigger switch board switch board insulated line battery pole tie-in motor left shel...