TATA Motors Aria Owner's Manual & Service Book - page 132
IN CASE OF EMERGENCY
122
TAIL LAMP BULB REPLACEMENT
3. Disconnect the connecter by pulling
it out firmly.
4. You can now replace any of the
damaged / fused lamp bulbs from the
tail lamp cluster.
5. Rotate the bulb holder in
anticlockwise direction and remove
the assy.
6. Take out the bulb from holder &
replace with new one.
7. Rotate the bulb holder in clockwise
direction for fitment.
8. Fit the tail lamp by fastening the nuts
holding it.
NOTE
Same procedure is applicable for all
the bulbs of tail lamp.
Tail Lamp bulb replacement
procedure:
CAUTION
• Allow bulbs to cool down before
you change them.
• Keep bulbs out of reach of children.
• Never use a bulb which has been
dropped. Such a bulb may explode
and injure you.
1. Open the tail gate
2. Remove the two nuts holding the tail
lamp.