TATA Motors Nano Owner's Manual & Service Book - Hazard Warning Switch :

49

Advance Warning Triangle :

Hazard Warning Switch :

An advance warning triangle is

provided along with your vehicle. In

case there is a breakdown and or the

vehicle is to be parked at the side of

road, then the triangle is to be used

as per instructions given below:

1. Remove advance warning triangle

from it’s cover and assemble.

2. Place the triangle on the road

behind the vehicle where it is

stranded.

3. The triangle must be at least 50

meters behind the vehicle in the

same lane of traffic.

4. Increase the distance to 150

meters on a highway or if a bad/

hill top obscures the view.

Use Hazard Warring lights besides

advance warning triangle in case of

breakdown specially during night

time and vehicle has to be parked  at

the side of the road or vehicle is being

operated in adverse condition.

This  can be  operated without

ignition 'ON'.  Pull  the  hazard

warning switch (red knob) on the

nacelle behind the steering wheel,

all side indicator lights will flash

simultaneously to warn the other

road users about any hazardous

condition of the vehicle. Depress the

knob again to switch 'OFF' the hazard

function.

CAUTION

If the turn signal indicators do not

blink, then there may be problem

in electrical system. If the

indicators “Blink rapidly”, then this

indicates that a side indicator

bulb has failed. Get it rectified

immediately.

INCASE OF EMERGENCY

ADVANCE WARNING TRIANGLE &

HAZARD WARNING SWITCH