Tatung TME24 User Manual - page 12
11
Then press "▲/▼" key on remote control or "UP/DOWN" key on the control panel to choose the signal source. Press
"OK" key on the remote control or "MENU" key on the control panel and
will switch the current signal source to
the signal source you choose. (Remark: The number of HDMI and USB signals is variable; please refer to the actual
configuration.)
Menu operation description
Press ''MENU'' key on the remote control or on the control panel, then the
will display the main menu.
1. Press "/" key on the remote control or ''VOL+/VOL-'' key on the control panel to select the adjustment sort
menu, which includes 3 sorts: PICTURE, SOUND, OSD.
2. Press "▼" key on the remote control or ''DOWN'' key on the control panel to enter the adjustment sort menu.
3. Press "▲/▼" key on the remote control or ''UP/DOWN'' key on the control panel to
select what is needed to adjust in sort menu.
4. Press "/" key on the remote control or ''VOL+/ VOL-'' key on the control panel to
adjust the value or setting.
5. When the main menu appears on the screen, press the "MENU" key to exit; when
submenu appears on the screen, press the "MENU" key to return to previous menu;
press the "SOURCE" key to show the signal source selection menu, and press it
again to exit from the menu.
6. In the process of menu operation, the unavailable options in current state will be in
gray.
7. The menu operation in this manual uses the example in
state; the operations in
other state are same as the
state.
Note: "", " ", "▲" and " ▼" key in this Manual stand for the direction cursor keys on
the remote control unless specifically defined. The operating instructions in the text below are all based on keys on the remote control.
Please understand the keys on the panel by yourself.
Monitor
Monitor
Monitor
Monitor
Input Source
AV1
AV2
YPbPr
PC
HDMI1
HDMI2
USB1
USB2
Adjust
Select
Menu:Exit
Full
Standard
48
48
50
55
50
Picture Mode
Contrast
Brightness
Saturation
Sharpness
Aspect Ratio
Color Temp.
Noise Reduction
Hue
Soft
Off